Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
Adapter for filling 13Kg gas bottles. Cup for France, Italy, Portugal. Possibility of adding another adapter for other countries
Filling of gas cylinders prohibited in France and ItalyAdapter sold without seal! (sealing is metal to metal)
On PROMO secure camper van bottle follow the link SECURE GAS BOTTLE
DIRECT ACCESS A DEMONSTRATION OF LPG BOTTLE FILLING
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
Fuel gauge refill emulator. SUBARU-MAZDA The car indicates the loss of fuel in the tank even if the fuel is not consumed. Through the use of the EPP emulator, the fuel level indication will be restored to its actual state each time the engine is started
In some modern cars, the fuel level is determined when the engine is started based on sensor readings in the fuel tank. The fuel level indication on the driver's gauge is corrected by the gasoline computer according to the current consumption resulting from the gasoline injection times. In this case, when driving on gasoline, the gasoline level indicator in the car shows the loss of fuel in the tank even if the fuel is not consumed. Through the use of the EPP emulator, the fuel level indication will be restored to its actual state each time the engine is started.
The small dimensions of the device and the airtight housing allow the device to be mounted at the level of the fuel tank, where the emulator can be exposed to weather conditions.
Technical data :
– supply voltage – 10 – 15V – operating temperature – -20°C – +70°C
The table shows examples of vehicle models where it is advisable to use the EPP fuel level emulator. Some cars may have different plugs than described in the manual.
In cars not listed in the table, where there is a virtual fuel loss problem, the emulator must be connected according to diagram 3.
The correct fuel level signal line can be found using a voltmeter (the voltage changes with the change in fuel level in the tank). As a general rule, the good thread is thinner than the others.
Pitagora AEB160u emulator - 4 cylinders for Bosch injector, allowing the cut-off and emulation of petrol injectors when the engine is in Gas mode. Universal beam
Emulators distributed by AIRGPL and in its network of LPG garages
The BRC S modular emulator with connector for Bosch type injectors is specially designed for 2 to 4 cylinder engines, with the mission of interrupting the operation of gasoline injectors when using LPG (liquefied petroleum gas) , while simulating the injector signal to the ECU. Thus, the transition from gasoline to LPG is seamless and the original ECU...
Fuel gauge refill emulator. PEUGEOT CITROEN RENAULT The car indicates the loss of fuel in the tank even if the fuel is not consumed. Through the use of the EPP emulator, the fuel level indication will be restored to its actual state each time the engine is started
FUEL LEVEL GAUGE MODULE used on Subaru equipped with LPG with Nécam equipment This module allows you to trick the calculator when the engine is powered in LPG mode. (The faulty module is installed in the passenger compartment under the dashboard)
Emulator is used on some Jaguar. This emulator has been designed to maintain a constant voltage of the fuel pressure sensor on Jaguar thus avoiding the ignition of the engine fault warning light. the emulator works only when the engine is on LPG It is necessary to install AEB J when the vehicle is equipped with a sensor at the end of the injection rail...
FUEL GAUGE SIMULATOR allows the fuel gauge to be tricked when the vehicle is on LPG AEB ALFA ROMEO. Items available only on order delivery time between 5 and 7 working days
The BRC S modular emulator (soldered separately, without a connector) is specifically designed for 2- to 6-cylinder engines. Its purpose is to interrupt the operation of the gasoline injectors when using LPG (liquefied petroleum gas) , while simultaneously simulating the injector signal to the engine control unit (ECU). This ensures a seamless...
Pitagora AEB160-U 6-cylinder emulator with universal harness allowing the cut-off and emulation of gasoline injectors when the engine is in Gas mode. Universal beam
Emulators distributed by AIRGPL and in its network of LPG garages
HI MM 2-cylinder BRC modular emulator ideal for interrupting the gasoline injectors of the 2 to 4-cylinder injection system when the engine is running on LPG. Suitable for Flying injection, Just, Just heavy, eco-gas etc. systems
SOLD WITHOUT CUTTING CABLES (Available on this site)
Fuel gauge refill emulator. SUBARU-MAZDA The car indicates the loss of fuel in the tank even if the fuel is not consumed. Through the use of the EPP emulator, the fuel level indication will be restored to its actual state each time the engine is started
