compressiometre all gasoline engines 0 - 20 bar (0 to 300 psi).
2x pcs) tools for the removal of injection pump without removing engine parts additional.For quick and EASY. Used on BMW M47, M47TU, M57, M57TU – (318D / TD, 320D / TD, 330D, 525D, 530D, 535D, 730D); Land Rover TD4, M47 – (Freelander); ROVER: 75.
Box Pump Universal Pressure / Vacuum Bleed The Brake.
COMPRESSIOMÈTRE FOR GASOLINE ENGINES – YOU-20- Quickly measure the compression of your cylinders at the thread of candles with this compressiomètre for gasoline engine.
Tester oil pressure + 12 adapters Pressure gauge professional to measure the oil pressure in the engine and automatic transmissions.The device is designed to measure the oil pressure in a combustion engine. The device is connected to the vehicle in place of the oil pressure sensor with an appropriate adapter.
CONTROLLER PRESSURE FUEL SYSTEMS INJECTION
STÉTOSCOPE FOR DETECTING DEFECTS Provides a fast and easy way to locate problems in the moving parts of the engines and, in particular, the bearings and other parts.
Professional tool to test injectors diesel 0 to 600 bar Tester-injector is used to control and check the pressure, the quality of spraying and the control of the sealing of the injector to provide power and fuel efficiency.
KIT TIMING INJECTION PUMP DIESEL
GAMES OF PLUGS FOR CONTROLLER SEALED LIQUID COOLING
BOX DIAGNOSIS SYSTEM COMMON RAIL DIESEL CDI Designed to measure the amount of fuel that every injector returns to match the injectors to ensure the proper functioning of the engine. Can be used to identify the injectors are damaged or clogged. The kit can measure up to 6 injectors simultaneously.
EQUIPMENT TIRE FOR REPLACEMENT OF THE COOLING FLUID Pneumatic device for the filling of the cooling system. The kit includes:– 2 rubber endFilter – tip suction placed at the end to prevent contamination of the cooling system– Gauge protected by a rubber cover
LIQUID OF REACTION TO CONTROL THE COOLING (COOLDOWN) Liquid of reaction to control the cooling (cooldown)Packaging 250ml.The liquid reaction for measuring the content of CO2 in the cooling system.Used with the kit to control the cooling system 20A-1025B. a-1025b-1
TESTER OF PRESSURE OF THE RADIATOR AND THE COOLING SYSTEM
LEAK DETECTOR IN THE COOLING SYSTEM
Stétoscope electronic automotive mechanic Provides a fast and easy way to locate problems in the moving parts of the engines and, in particular, the bearings and other parts.
Box of circlips external - 300pcs.
key special triangular for Injectors BOSCH VAG special keys triangular, 5 pieces
Key angular clamp, magnetic 1/2" Square drive 1/2" Sector of a 360° flexible arm with magnet
Thread for thread of the lambda probe, M18 x 1.5 suitable for the size of thread repair M18 x 1.5, for example thread lambda
Tool for clutch pulleys for alternator Bosch-spline M10 in 3/8
Key to tuyauter for pipes of diesel injectors -17mm Key double ring for the line diesel injection Application: Universally applicable, spec. for lines of injection Features: Opening key double ring, especially suitable for difficult access Shape: curve and dethroned Material: steel chrome-vanadium
THE KEY FOR THE PULLEY OF THE TIMING BELT Curved handle for easier access to other parts of the pulley to tighten the belt. – Tool length: 400mm.– the key size : 12,13,14,15,16,17,18,19 mm ( 12 hex) For the correct voltage, you can use our gauge Ref : 2001597
KEY RIBE BOLTS OF THE cylinder HEAD AUDI SEAT SKODA VW 200mm Key RIBE for the head bolts, Audi, Seat, Skoda and Volkswagen 200mmThis wrench was designed to remove the head bolts engine 1.8 L 20Vtip: 1/2 ”Size: M10 x 200 mm
Torque indicator with a square of 1/2”
Pump repriming G. O after exchange filter
The robust housing and the handle of plastic of high quality offer optimum protection placed on the inside of components.Mechanism to Disconnect, the strength of the torque transmitted in combination with a high-quality built-in mechanism of a compression spring ensures the high-precision clamping operation subsequent to the long-term.
Tool for removing the pump HP BMW diesel - OEM 118740 Professional tool to remove the pump sprocket HP engines-chain N47 / N47S and N57 BMW. OEM REF 118740
For the removal of spark plugs that are defective and broken. Suitable for many models of engines, Audi, Seat, Skoda, VW, Mercedes, Opel, Peugeot, Renault and other brands.
A CYLINDER HAS 2 FLOORS AND PUMP AND RELEASE PEDAL Jack transmission 1 ton two-storey and pump and release pedal This jack-of-transmission to two floors facilitates the handling and positioning of transmissions on passenger cars and light trucks
Jack, hydro-pneumatic 25 and 50 tons with actuator two-storey The cylinder is equipped with an actuator to two floors: And lifting capacity is : – Position I lifting capacity 25T– Position II lifting capacity 50T
Floor jack, hydro-pneumatic with a capacity of 22.000 kgs This hydraulic cylinder is perfectly suited for industrial applications. The jack has a lifting capacity of 22 tonnes, and is a perfect aid in your workshop. It has a small height, underlying to provide access up and easy adjustment. This article is perfectly applicable in garages, workshops and...
This pneumatic cylinder is powered by compressed air. Jack pneumatic 4.5 ton 3 socks Maximum pressure 8 barWeight 23 [kg]Capacity 4,5 [t]Minimum height of 125 [mm]Max. height 355 [mm]Race 230 [mm]Minimum pressure 7 bar
Hydraulic floor jack aluminum -9 kg -special convenience store – Reduced weight through aluminium construction– min Height: 125 mm– max. Height: 340 mm.– Length: 492 mm – Width: 230 mm– Weight: 9.2 Kg– front wheel: Ø 65 mm– Swivel castors: Ø 40 mm– with convenient carry handle
Hydraulic jack very slim - 3T dual-piston Jack car very low with a capacity of 3000 kg. The reduction of the maximum lift point is at 70mm with optimum rigidity allows it to work with all types of vehicles, including vehicles with low ground clearance and the cars equipped with a lowered suspension.
Compressor valve springs OHV & OHCDesigned to work with gasoline and diesel fuel, with valves depressed.Use in OHV and OHC.The device can be used to take charge of or removed the head.It applies to most engines.The adjustable handle lets you work in hard to reach places. Spacing: 55mm-175mm
Inspection camera professional video with screen color LCD Camera 640×480 Color camera, waterproof meets IP67 and equipped with a camera head and ultra-thin 8 mm and a flexible cable of 1 mFacilitates the inspection area is difficult to access.Color screen
tester of pressure of the cooling system of radiator and a set of vacuum pump,– 25 piece set is ideal for testing for leaks in the radiator and the coolant to make a quick change.
This suitcase GPL mx808 home ALTAR is a remarkably effective and other able to diagnose ecus of origin of vehicles GPL, it uses the diagnostic software manufacturer (DIAGBOX / CLIP / ISTA/ VAS/ ODIS/ NISSAN CONSULT etc... WARRANTY 2 YEARS + 1 year update free RESERVED TO the PROFESSIONALS OF The AUTOMOTIVE MORE INFO BELOW
The suitcase ALTAR 808 LPG/ CNG original product dedicated to the programming + duplication of valves TPMS , can also make automotive diagnostics on all systems + service functions & reset (reset drain, regeneration, FAP, food additive, EPB, BMS, Bleed Brakes etc.) RESERVED TO the PROFESSIONALS OF The AUTOMOTIVE MORE INFO BELOW
The suitcase MaxiSys MS906 is based on the Android operating system has a wide range of coverage level OE at an affordable price. Powerful processor Exynos 5260 6-core processor, a hard disk 32G SSD and a HD display, touch 8\" capacitive, MaxiSys MS906 is a solution of diagnosis multi-brand automobile effective. MORE INFO BELOW
MaxiSys MS906 BT - 2 years of Updates Promotion : 2 years of updates included Delivered ready to operate and up to date Warranty 2 years Supplementary insurance included Dedicated support Technical basis Haynes in option In-line coding Coverage of more than 120 brands Level OE MORE INFO BELOW
MaxiDAS DS808 allows you to do: Diagnosis all systems LPG CNG ELECTRIC Automatic detection of the vehicle in one click Codage Adaptation Programming time between key Functions of service + the functions of service & reset (reset drain, regeneration, FAP, food additive, EPB, BMS, Bleed Brakes etc.) MORE INFO BELOW
COMPRESSIOMETRE AND CONTROLLER LEAK FOR PETROL & DIESEL HDI & TDCI Quickly measure the compression of your cylinders compression and pressure predicted for the gasoline and diesel engines, suitable for most petrol and modern HDi, TDCi, injectors unit and the old diesel engines Compression testing up to 50 bar Description below
Repair system inexpensive and strong nets of candles damaged – No disassembly of the cylinder head – Repair solid and waterproof screw – Also great for seating conical (without gasket).
Shims of a thickness of 0.05-1.0 mm for adjustable rocker arms comprising:• 19 sheets: 0,35, 0,40, 0,50, 0,60, 0,70, 0,80, 0,90, 1,0 (mm),• the thickness of the leaves: 1/100 (mm)• the sheets of copper 100 mm• width: 10 mm• sharp tip
Shims of thickness precision, wide and curved/ 16 blades Measurement of the thickness of the panes:0,05, 0,1, 0,15, 0,2, 0,25, 0,3, 0,35, 0,4, 0,5, 0,55, 0,6, 0,7, 0,75, 0,8, 0,9, 1 mm
Repair system inexpensive and strong nets of candles damaged – No disassembly of the cylinder head – Repair solid and tight the screw Kit Repair Thread spark Plug M14 x1,25 The set includes a tool to tap and 4 inserts of different lengths 10mm, 11,20 mm,12,70 mm and 19mm
Tooling for the engines and injection, such as puller injectors, diesel glow plugs, regulator valves, pump calibration injector diesel...