Reference: FL01A24

Brand: AIR GPL

UNIVERSAL FILTER Ø14 FL01A24

(0)
Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01 PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
€14.17 €15.75
More
(Discount by quantity reserved for professionals) See table above

Reference: AD6147-GZ2010-C50

Brand: AIR GPL

LPG GAS BOTTLE ADAPTER 13KG GZ2010-C50

(0)
Adapter for filling 13Kg gas bottles. Cup for France, Italy, Portugal. Possibility of adding another adapter for other countries Filling of gas cylinders prohibited in France and ItalyAdapter sold without seal! (sealing is metal to metal) On PROMO secure camper van bottle follow the link SECURE GAS BOTTLE DIRECT ACCESS A DEMONSTRATION OF LPG BOTTLE FILLING
€24.17
More
In stock

Reference: LR0275FKN208A-13 674072000

Brand: Landirenzo

FILTER DACIA OPEL LI02-IG1 LR0275FKN208-A13

(0)
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident . Discount by quantity reserved for professionals See table below
€4.95
More
In stock

Reference: FPG2512-A25

FILGAZ FILTER FPG25 DACIA RENAULT LPG Ø12 FPG2512-A25

(0)
FILGAZ FPG25 LPG filter Ø12X12 (Discount by quantity reserved for professionals) See table below "Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...  
€14.17
More
In stock
All best sellers
  • Banner

KEY ANGULAR CLAMP, MAGNETIC
  • KEY ANGULAR CLAMP, MAGNETIC

MAGNETIC ANGULAR WRENCH

20bgs3170
AIR GPL

 1/2″ magnetic angle wrench 1/2″ square drive 360° sector Flexible rod with magnet

€46.95
Quantity
Last items in stock

Description

1/2″ magnetic angle wrench 1/2″ square drive 360° sector Flexible rod with magnet

A torque wrench does not give, if it is misused, optimal precision, the angular torque avoids exceeding the requested torque, generally this operation is to be applied for the cylinder head, it avoids its deformation and moreover the screws fill their clamping force, a screw that is too tight stretches and breaks, here are some reasons for angular tightening

– precise workshop model
– allows angle controlled clamping
in a single operation
– max. Load capacity about 280 NM

Product Details
AIR GPL
20bgs3170
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: 20256243

3/4″ RATCHET

(0)
3/4″ ratchet Total length 500 mm, weight 2350 grams 3/4″ (20 mm) square drive, with quick insertion release made of chrome-vanadium steel, chrome-plated, straight version, with knurling at the end of the handle bolt shank, chrome plated, 24 teeth Tool in execution of the highest quality for long life in daily use in the workshop
€55.49
More
In stock

Reference: KS

KS-TOOL PNEUMATIC PISTON REPELLERS

(0)
KS TOOL brand pneumatic piston pusher used for resetting the brake piston. Indispensable in a mechanical workshop
€129.00
More
Last items in stock

Reference: 20kb02232

TA PLUG FILE REPAIR KIT

(0)
Inexpensive and solid repair system for damaged spark plug threads – No dismantling of the cylinder head – Solid and tight repair of screw threads M14 x 1.25 Spark Plug Thread Repair Kit The set includes a tapping tool and 4 inserts of different lengths 10mm, 11.20mm, 12.70mm and 19mm
€27.65
More
In stock

Reference: 20ts-245017

SET OF 3 LOCKING PLIERS FOR WELDING AND BENDING

(0)
Set of 3 vice-grips for welding and bending. A vice grip is a clamping tool used for mechanical, DIY or other activities. It is a clamp that has the particularity of being equipped with a locking device allowing its jaws to be maintained in a specific position even after the handles have been released. This allows it to be used as a portable vise.
€33.54
More
In stock

Reference: 20s-abj3

PNEUMATIC JACK 3 BODS - 3 TONNES

(0)
Pneumatic jack 3 cylinders - 3 tons The Pneumatic Cushion Lift, commonly referred to as the SATRA Snowman, has been designed and manufactured to lift vehicles up to 3000 kg. The jack has two control valves, inlet and outlet, which makes control very easy. SEE DESCRIPTION BELOW
€302.85
More
Last items in stock

Reference: 20HH1103B

WEDGE FOR ROCKER ARM ADJUSTMENT 20HH1103B

(0)
0.05-1.0mm shims for rocker arm adjustment including: • 19 sheets: 0.35, 0.40, 0.50, 0.60, 0.70, 0.80, 0.90, 1.0 (mm), • sheet thickness: 1/100 (mm) • 100 mm copper sheets • width: 10mm • sharp tip
€9.59
More
In stock

Reference: 20a-16180

CAMSHAFT BELT REPLACEMENT TOOL OPEL FIAT SAAB ALFA

(0)
Camshaft Belt Replacement Tool Opel , Fiat, Saab, Alfa Romeo - PetrolFor Engine Codes: 1.4 16v: G14D 1.6: A16LEL, A16LER, A16LET, A16XER, LDE/A16LER, LDE/A16XER, LLU/A16LET, Z16LEL, Z16LER, Z16LET, Z16XE1 1.6 ecoFLEX CNG: A16XNT, LGE / A16XNT, Z16XNT 1.8: 2HO/A18XEL, 2HO/A18XER, A18XER, Z18XER, 939A4.000
€47.28
More
Last items in stock

Reference: 20a-2000

20 TON HYDRAULIC PRESS

(0)
20 ton hydraulic press for press-fitting bearings and axles or straightening metal parts features:
€568.20
More
In stock

Reference: 20t63005f

ENGINE AND GEARBOX MOUNT FOR GARAGE -900 KGS

(0)
Stable steel construction 900 kg load capacity Mounting plate can be rotated 360° and locked in desired position Adjustable mounting arms Can be adapted to different engines and transmission types For practical and easy mounting of engines and transmissions Folding construction, the device can thus be stored along the wall, 4 plastic wheels
€207.57
More
In stock

Follow us on Facebook