The kit includes tools for removal and installation for almost all clutches compressor A / C for automobiles.For the disassembly and installation without damage to the hub clutch of these air conditioning compressors:Fs6,
Extractor/puller ball joint 16 to 27 mm with adapter for pneumatic hammers or handThe most classical method for the disassembly of the ball joints is to loosen the nut two turns, then to hitting on axis conic section for the démancher of eye.
This set of tools is particularly suitable for 4WD, utility, and especially to :– VW T4– Renault Master– Opel Movano– Nissan Primastar
Tools for the disassembly and installation of v-belts tools kit for the removal of the belts, ribbed elastic
compressiometre all gasoline engines 0 - 20 bar (0 to 300 psi).
Bellows of cardan universal - 4 pieces
Our kit of 17 pieces for alignment of the clutch is very useful to quickly align and precisely the flywheel and the clutch disc. These tools are made of steel and blackened chemically. This kit is compatible with most vehicles and can be stowed and transported easily thanks to its malette
Installation bellows of cardan , this pneumatic tools, with its 8 articulated Arms allow you to remove the bellows and put it in place.Also suitable for all types of transmission shafts, VL and utiitaires light.
Key: Used for models: VW Polo, Golf 1.4 / 1.6 L, 1.4 L, Caddy, Bora 1.4 L / 1.6 L, Passat, Touran 1.6 L, Phaeton, Transporter T4.B Key: Used for the engines 5 and 6 cylinder VW Golf, Bora (4,5 cyl.), V6 Passat, Sharan, Touareg, Phaeton.C button: use for VW 8 and 12 cylinder engines.D Key: use for VW 8 and 12 cylinder engines.
VAG 1.2 / 1.4 / 2.0 Isp after 2013Tool OEM10530 used to secure the dismantling of ignition coils for petrol FSi: 1.2 / 1.4 / 2.0 in cars volkswagen, Audi, Skoda, Seat after 2013.Coil puller ignition Specialist VW serial number OEM T10530
TOOLS FOR INSTALLATION OF BEARINGS AND SEALS MISCELLANEOUS-10PCS These tools mounting of bearings are designed to allow mounting and dismounting a fast and accurate shafts, bearings, seals and gaskets spy, sealing, and the set easily, avoiding the degradation of the surfaces of the bearings.
EXTRACTORS STUD ROLLER. DÉGOUJONNEUSE -7 PCS Set of extractors of studs roller. DégoujonneuseFor studs : – 5mm with square 3/8"– 6- 7 – 8 – 10 – 12 with square 1/2"– 14 with a square 14mmThese sockets have rollers that are blocked automatically by turning on the studCan also be used on the screw to the leftSystem that is particularly effective
MOUNTING OF BEARINGS AND SEALS BOX 17 PIECES
TOOL FOR LOOSENING THE BALL JOINT IN AXIAL DIRECTION 34-42MM The device allows you to make repairs without removing the steering mechanism
Use the hole adapted to the diameter of the stud.Tighten or loosen : because of its eccentric axle, the wheel grips the stud and provides a means of tightening or loosening. Range of use : from 6 mm to 19 mm (¼ to¾”)This tool enhances the grip and strength due to its eccentric.Ideal for tightening or loosening the bolts.
Suitable e.g. for Mercedes CDI engines OM 611, OM 612 and OM 613, BMW 525d and 530dtees. Puller injectors Common-Rail system Bosch/Delphi Designed to remove injectors seized Common Rail from the cylinder head.For use, among other things, systems, BOSCH / DELPHI.Puller injectors for engines Mercedes CDI, 8 pieces
For the removal of spark plugs that are defective and broken. Suitable for many models of engines, Audi, Seat, Skoda, VW, Mercedes, Opel, Peugeot, Renault and other brands.
Extractors, internal and external, provide a variety of combinations to pull bearings, gears and seals. It consists of an adapter, wrench, hook traction, a puller for the rear axle, etc
Hydraulic press 20 tonsfor slip-in strength of bearings and axles or straighten metal parts features:
Compressor valve springs OHV & OHCDesigned to work with gasoline and diesel fuel, with valves depressed.Use in OHV and OHC.The device can be used to take charge of or removed the head.It applies to most engines.The adjustable handle lets you work in hard to reach places. Spacing: 55mm-175mm
EXTRACTORS STUD ROLLER. DÉGOUJONNEUSE -7 PCS Screw extractor roller, degoujonneuse, 12 mm Chrome VanadiumUnscrewing of the rods and studs damagedLength : 75mmdrive square 1/2" Complete kit of 7 extractors in the reference 20a-7STUD in our search engine
EXTRACTOR, SCREW, stud, bolt Unscrewing of the rods and studs damaged extractor studs, screws or bolts 6 extractors to ratchet 3/8Ø of extraction heads from 2 to 10 mm Particularly suitable is ideal for extracting screws internal footprint, Torx, star, vis 6 pans, BTR, Allen... MA10556-A
PULLER WHEEL BEARING VW T5 MULTIVAN AND TRANSPORTER, TOUAREG - Ø 85 MM A special kit to install and remove the bearings – wheel hub with a diameter of 85mm. The use of this kit allows disassembly of the bearing – hub at a suitable angle, which is very important to avoid damage to the envelope and other elements. Suitable for VW T5 and Touareg with rims 16"
Installation bellows of cardan , this pneumatic tools, with its 8 articulated Arms allow you to remove the bellows and put it in place.Also suitable for all types of transmission shafts, VL and utiitaires light.
Repair system inexpensive and strong nets of candles damaged – No disassembly of the cylinder head – Repair solid and waterproof screw – Also great for seating conical (without gasket).
Repair system inexpensive and strong nets of candles damaged – No disassembly of the cylinder head – Repair solid and tight the screw Kit Repair Thread spark Plug M14 x1,25 The set includes a tool to tap and 4 inserts of different lengths 10mm, 11,20 mm,12,70 mm and 19mm
Tears off arm of the wiper. Ideal for the loosening of the arm of wiper.
Installation bellows of cardan , this pneumatic tools, with its 8 articulated Arms allow you to remove the bellows and put it in place.Also suitable for all types of transmission shafts, VL and utiitaires light.
Arrache roulements & rotules, extracteur de goujons,compresseur de ressors, amortisseur, silent-blocs etc...