Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
Adapter for filling 13Kg gas bottles. Cup for France, Italy, Portugal. Possibility of adding another adapter for other countries
Filling of gas cylinders prohibited in France and ItalyAdapter sold without seal! (sealing is metal to metal)
On PROMO secure camper van bottle follow the link SECURE GAS BOTTLE
DIRECT ACCESS A DEMONSTRATION OF LPG BOTTLE FILLING
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
Vapo LPG GFI / AG 1250MB without temperature sensor, Also suitable for Clio, Twingo, Espace and Scenic vehicles after 2001 vapo is delivered with the conversion sensor kit with connector (without soldering)
Please note: Gas inlet and outlet must be replaced with the connections from the old vaporizer (see photos)
Reserved for professionals or experienced amateurs
Vapo LPG AG/ GFI 1250 mbar (without temperature probe)
🚗 Compatibility
Suitable for Renault vehicles with original LPG (Scénic 1996–2000) and, with conversion sensor, for Clio, Twingo, Espace and Scénic post–2001.
Product Contents
LPG AG/ GFI 1250 mbar pressure reducer
Without temperature probe or pressure sensor
Supplied with conversion sensor kit with connector , solderless (model GFAC-07C-242-K42)
⚠️ The inlet and outlet gas connections must be replaced with those of the previous vaporizer (refer to the photos).
Target audience
⚙️ Reserved for professionals or experienced DIY enthusiasts, LPG experts.
✅ Key assets
Genuine Renault part, perfectly suited to the models mentioned
Easy conversion: solderless kit included
Simplification: “probe-free” version ideal for existing installations
Updated option: upgrade to the more reliable modern model (reference GFA07-242-K42)
🛠️ Installation & maintenance
Replace the gas fittings with those from the old vaporizer (see photos).
Install the solderless sensor kit.
Check the tightness and adjust the pressure to 1250 mbar.
Check LPG engine operation: no leaks, stability. Hire a professional for safe and proper installation.
🎯 Why choose this model?
Manufacturer quality , compatible with several Renault LPG models
Economical : update without replacing the entire control unit
Modular : possibility of adding a pressure probe or sensor later
Technical response to the current needs of LPG owners
📦 Kit contents
Included items
Details
AG/ GFI vapor regulator
1250 mbar, without probe
Conversion sensor kit
Plug-and-play, solderless connector
🛑 Please note
Does not include sensors or gas connections (to be taken from the old vaporizer)
Use reserved for technicians or experienced LPG enthusiasts
In short
A reliable and adaptable LPG regulator for Renault vehicles, optimized for professionals: functional upon receipt, with easy conversion via plug-and-play kit. Caution: Change of fittings required - specialist installation recommended. (to be used on the old vaporizer)
Mme Monsieur Enfin un vapo et capteur qui marche ( super bien)! Ça fait 3/4ans que je pinaille pour trouver la panne (intempestive)de mon GPL KANGOO de 2006. Fallait juste changer le vapo et capteur d'origine par celui ci. Ayant remis un vapo reconditionné et un capteur neuf.(plusieurs capteurs depuis l'achat)à 200 €u(g)ros pièces. Toutes les économies du roulage en gas GPL ( évaporées)! Faut absolument prendre ce kit si vous avez un problème récurrent sur votre GPL d'origine.
Sagem pressure sensor conversion kit, replaces the pressure sensor attached to the pressure reducer of the RENAULT TWINGO, CLIO, SCENIC, fitted as standard in LPG.
Supplied with assembly instructions
(Discount by quantity reserved for professionals) see table below
16 x 16 mm aluminum mechanical adjustment screw for LPG carburetor system 16 x 16 mm aluminum mechanical adjustment screw, specially designed for the precise adjustment of LPG systems equipped with a carburetor with mixer. It allows for efficient adjustment of the air/gas ratio , thus ensuring optimal combustion and stable engine operation.
AIRS TA G kit FOR Renault 6001 LPG vapo replacement.This kit includes 1 small LPG regulator STAG R02ELC, (gas outlet Ø12&16) 1 gas pressure sensor kit with QUICK CONNECTOR, clamps, LPG filter Ø16. Ideal and above all cheaper, more reliable than a Vapo Renault. Suitable for Clio Twingo, Kangoo
(Discount by quantity reserved for professionals) see table...
AIRSTAG Type R02EL Vapor Regulator
The AIRSTAG type R02EL steam regulator is the ideal solution for vehicles with a maximum power of 150 KW, in particular to replace the AG GFI 6001 regulators on Renault Clio, Twingo and Kangoo models.
Features :
Performance and Stability: This steam regulator ensures optimal gas regulation, guaranteeing reliable and...
Vapo LPG GFI / AG 1250MB without temperature sensor, Also suitable for Clio, Twingo, Espace vehicles and Scenic after 2001 vapo comes with the conversion sensor kit Please note: Gas inlet and outlet must be replaced with the connections from the old vaporizer. Reserved for professionals or experienced amateurs
Waterproof solder connector (AMP type)
This AMP-type waterproof connector is specially designed for Hercules or Hana injectors. It is also perfect for replacing old connectors on certain solenoid valve models, including BRC , Renault or Icom.
✅ Guaranteed waterproofness : optimal protection against humidity and dust
✅ Reliable welding : robust and...
EOM DUSTER Turbo LPG Regulator Vapo Compatible Dacia Duster 1.0L Turbo ( Installed on Dacia Duster 1.0 74KW H4D (2019-2024)
"Depression nipple facing down and gas outlet elbow, directed towards the center of the vaporizer"
Description below
Bosch, Sagem pressure sensor conversion kit, replaces the pressure sensor attached to the pressure reducer of the RENAULT TWINGO, CLIO, SCENIC, fitted as standard in LPG. This kit allows you to connect the 2 sensors without carrying out welding thanks to the integrated connectors
(Discount by quantity reserved for professionals) see table below
Landi Renzo Turbo LPG Regulator ( Renault Reference 163103466R ) - ( LR Reference 674000792 )Compatible Dacia Sandero and Duster 1.0L Turbo
"Depression nipple facing up and GAS outlet elbow, directed to the right"
🔧 Original part |
Description
The Landi Renzo Turbo LPG regulator is an essential part of the LPG system, ensuring optimal gas regulation for...
Landi Renzo Turbo LPG Regulator (H4d) Compatible RENAULT/Dacia 1.0L Turbo ( Dacia Sandero/Logan/Jogger 1.0 74KW H4D (2021-) Renault Clio/Captur 1.0 74KW H4D (2019-)
"Depression nipple facing up and gas outlet elbow, directed towards the center of the vaporizer"
Description below
High quality 90° Alu Ø16x12 fitting, Fitting used to connect water hoses or gas between them Ideal for connecting the LPG hose of a Tomasetto vape (3910 or 3850)
RESERVED FOR PROFESSIONALS Replacement kit AIRS TA G to replace Renault 6001 LPG vaporizerThis kit includes 1 STAG R02EL LPG regulator vapo, (Gas outlet Ø12 & 16) 1 gas pressure sensor kit, clamps, water connection, LPG filter Ø16. Ideal and above all cheaper, more reliable than a Vapo Renault. Suitable for Clio Twingo, Kangoo
(Discount by quantity...
THIS VAPO LPG GFI 6001 IS NO LONGER AVAILABLE and replaced by the reference GFA07-242-K42 ( VAPO GFI (1250mb) (without temperature probe) GFA07-242-K42) (There is also an Ideal replacement vaporizer, more reliable and above all less expensive than a Renault Vaporizer) Follow the link below Replacement Vapo Kit here
Vapo LPG GFI / AG type DGI 1250MB without temperature sensor, Without pressure sensor, mounted on Scénic LPG Original from the years 1996 to 2000 Also suitable for Clio, Twingo, Espace and Scenic vehicles after 2000
19 x 19 mm aluminum mechanical adjustment screw for LPG carburetor system Product description: 19 x 19 mm aluminum mechanical adjustment screw, specially designed for the precise adjustment of LPG systems equipped with a carburetor with mixer.
Vapo LPG GFI / AG 1250MB without temperature sensor, Also suitable for Clio, Twingo, Espace and Scenic vehicles after 2001 vapo is delivered with the conversion sensor kit with connector (without soldering)
Please note: Gas inlet and outlet must be replaced with the connections from the old vaporizer (see photos)
Reserved for professionals or experienced amateurs
(6)
(0)
(0)
(0)
(0)
(0)
