Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 22.4-25.6mm stainless steel construction,
ideal for tightening hoses for LPG injectors Ø16 INT and Ø24 EXT
(Discount by quantity) see table below
Brass T-fitting Ø 16 x 16 x 5 mm – Special for LPG ( GFI )
Description
This high-quality brass T-fitting is the ideal solution for replacing and relocating the original sensors on GFI vaporizers.
Designed specifically for original manufacturer LPG vehicles, it allows for the easy connection of three pipes of different diameters (two 16 mm pipes and one 5 mm pipe).
Brass T-fitting Ø 16 x 16 x 5 mm – Special for LPG ( GFI )
Description
This high-quality brass T-fitting is the ideal solution for replacing and relocating the original sensors on GFI vaporizers.
Designed specifically for original manufacturer LPG vehicles, it allows for the easy connection of three pipes of different diameters (two 16 mm pipes and one 5 mm pipe).
This is the essential spare part to make your vehicle's LPG system reliable or repaired in a clean and sustainable way.
Vehicle Compatibility
This fitting is perfectly suited for the original LPG systems of the following models:
Renault Clio
Renault Kangoo
Renault Scenic
Renault Espace
Strengths & Features
Robust design: Made of brass for excellent resistance to pressure, temperature variations and corrosion.
Precise dimensions: Allows perfect connection of 2 pipes of Ø 16 mm and 1 pipe of Ø 5 mm (ideal for tapping the pressure/temperature sensor).
Professional quality: Ensures maximum sealing for your LPG system after relocating the original sensor.
💡 Technical advice
Remember to equip yourself with suitable hose clamps (not supplied) to ensure a perfect seal during assembly.
360° rotating LPG filling fitting – 3/4 → Ø 8 mm360° rotating LPG fitting, type 3/4-Ø8, ideal for connecting the GZWM or STAKO type plate tank filling system, allowing the replacement of a Dutch-type hose with an Ø8 hose (see example in photo 2).
LPG fitting Ø 8 mm with non-return valve This 8 mm diameter LPG fitting is equipped with an integrated non-return valve , ensuring unidirectional flow. It allows for the safe connection of two FARO brand 8 mm diameter LPG hoses . Ideal for preventing gas backflow and enhancing the reliability of your LPG system. Key features: Safety: the non-return valve...
REDUCER ADAPTER Ø12,5mm in COPPER PIPE Ø8 Reducer fitting for connecting a FARO Ø8 type copper or flexible pipe with a VATEK Ø12.5mm beaten neck type solenoid valve mounted on STAKO GZWM plate tanks (Discount by quantity reserved for professionals) see table below
Brass cap with O-ring Ø14 x 1.25 / thread height 8mmThis plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass cap with O-ring Ø16 x 1.25 / thread height 8mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Ø6 copper / Ø8 copper flexible connection allowing direct connection, for example, of 1 solenoid valve or Ø6 Polyvalve with a Ø6 flexible
(Discount by quantity reserved for professionals) see table below
Gates Water or LPG straight fitting Ø 12x12 allowing to connect 2 hoses together; High quality GATES brand fitting straight outside diameter 12x12 Gates heater hose connectors are recommended for small diameter heater and radiator hoses, to provide a better seal between hoses of the same or different inside diameter.
90° / 360° swivel LPG connector – Ø 6 × 6 mm
Simplify your LPG installations with this 90° elbow fitting , designed for maximum flexibility. Its main advantage? A complete 360° rotation, allowing you to orient your pipes with perfect precision, without bending or damaging them.
Ideal for TOMASETTO multi-valves and solenoid valves , this fitting ensures a...
LPG reducing fitting for reducing the outlet of a multi-valve equipped to receive a Ø8 copper pipe with its Ø12 fitting to a Ø6 copper pipe with its Ø10mm fitting 👉 This reducing fitting is an essential component to ensure compatibility between different copper pipes on your LPG installations, while maintaining optimal performance.
Sagem pressure sensor conversion kit, replaces the pressure sensor attached to the pressure reducer of the RENAULT TWINGO, CLIO, SCENIC, fitted as standard in LPG.
Supplied with assembly instructions
(Discount by quantity reserved for professionals) see table below
Vapo LPG GFI / AG 1250MB without temperature sensor, Also suitable for Clio, Twingo, Espace vehicles and Scenic after 2001 vapo comes with the conversion sensor kit Please note: Gas inlet and outlet must be replaced with the connections from the old vaporizer. Reserved for professionals or experienced amateurs
Bosch, Sagem pressure sensor conversion kit, replaces the pressure sensor attached to the pressure reducer of the RENAULT TWINGO, CLIO, SCENIC, fitted as standard in LPG. This kit allows you to connect the 2 sensors without carrying out welding thanks to the integrated connectors
(Discount by quantity reserved for professionals) see table below
(Discount by quantity reserved for professionals) see table below
Brass T-fitting Ø 16 x 16 x 5 mm – Special for LPG ( GFI )
Description
This high-quality brass T-fitting is the ideal solution for replacing and relocating the original sensors on GFI vaporizers.
Designed specifically for original manufacturer LPG vehicles, it allows for the easy connection of three pipes of different diameters (two 16 mm pipes and one 5 mm pipe).
