Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 22.4-25.6mm stainless steel construction,
ideal for tightening hoses for LPG injectors Ø16 INT and Ø24 EXT
(Discount by quantity) see table below
Brass T-fitting Ø 16 x 16 x 5 mm – Special for LPG ( GFI )
Description
This high-quality brass T-fitting is the ideal solution for replacing and relocating the original sensors on GFI vaporizers.
Designed specifically for original manufacturer LPG vehicles, it allows for the easy connection of three pipes of different diameters (two 16 mm pipes and one 5 mm pipe).
Brass T-fitting Ø 16 x 16 x 5 mm – Special for LPG ( GFI )
Description
This high-quality brass T-fitting is the ideal solution for replacing and relocating the original sensors on GFI vaporizers.
Designed specifically for original manufacturer LPG vehicles, it allows for the easy connection of three pipes of different diameters (two 16 mm pipes and one 5 mm pipe).
This is the essential spare part to make your vehicle's LPG system reliable or repaired in a clean and sustainable way.
Vehicle Compatibility
This fitting is perfectly suited for the original LPG systems of the following models:
Renault Clio
Renault Kangoo
Renault Scenic
Renault Espace
Strengths & Features
Robust design: Made of brass for excellent resistance to pressure, temperature variations and corrosion.
Precise dimensions: Allows perfect connection of 2 pipes of Ø 16 mm and 1 pipe of Ø 5 mm (ideal for tapping the pressure/temperature sensor).
Professional quality: Ensures maximum sealing for your LPG system after relocating the original sensor.
💡 Technical advice
Remember to equip yourself with suitable hose clamps (not supplied) to ensure a perfect seal during assembly.
Aluminum fitting for BRC GENIUS MAX vaporizer regulator Ø 16 mm This aluminum fitting is designed for the water inlet and outlet of BRC GENIUS MAX vaporizers (Ø 16 mm). Sold individually, it allows a reliable and durable connection between your regulator and the water circuit. ✔️ Key features: Robust & durable material — aluminum body, corrosion...
Sagem pressure sensor conversion kit, replaces the pressure sensor attached to the pressure reducer of the RENAULT TWINGO, CLIO, SCENIC, fitted as standard in LPG.
Supplied with assembly instructions
(Discount by quantity reserved for professionals) see table below
Vapo LPG GFI / AG 1250MB without temperature sensor, Also suitable for Clio, Twingo, Espace vehicles and Scenic after 2001 vapo comes with the conversion sensor kit Please note: Gas inlet and outlet must be replaced with the connections from the old vaporizer. Reserved for professionals or experienced amateurs
Bosch, Sagem pressure sensor conversion kit, replaces the pressure sensor attached to the pressure reducer of the RENAULT TWINGO, CLIO, SCENIC, fitted as standard in LPG. This kit allows you to connect the 2 sensors without carrying out welding thanks to the integrated connectors
(Discount by quantity reserved for professionals) see table below
(Discount by quantity reserved for professionals) see table below
Brass T-fitting Ø 16 x 16 x 5 mm – Special for LPG ( GFI )
Description
This high-quality brass T-fitting is the ideal solution for replacing and relocating the original sensors on GFI vaporizers.
Designed specifically for original manufacturer LPG vehicles, it allows for the easy connection of three pipes of different diameters (two 16 mm pipes and one 5 mm pipe).
