Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 22.4-25.6mm stainless steel construction,
ideal for tightening hoses for LPG injectors Ø16 INT and Ø24 EXT
(Discount by quantity) see table below
The AC STAG R02 single stage LPG pressure reducer supplied complete with solenoid valve is designed for sequential injection systems. This vaporizer is used to reduce the pressure of liquid LPG flowing from the tank and transform it into a gaseous phase (vaporization).
Outlet Pressure Adjustable 0.9 to 1.5 bar / 110kW/150hp
AC R02 single stage reducer is designed for car sequential injection systems. The device is used to reduce the pressure of the liquid LPG flowing from the tank and transform it into a gaseous phase (vaporization).
The characteristics of the system reducer thermal insulation covers feature a compact size and a unique design comprising two aluminum castings and a cover made in the ACtherm system preventing gas cooling, thus providing excellent thermal insulation. Due to its unique design, the AC R02 heats up very quickly, so switching to gas is also done quickly. Therefore, no additional controller work, such as temperature correction, is required. Its high thermal efficiency and resistance to LPG contamination make the reducer the best option when selecting autogas system components.
System The AC R02 reducer is equipped with the unique ACPress system which provides constant pressure supply injector rails under various road conditions. It should also be noted that stability is guaranteed regardless of the inlet pressure at the gas cylinder.
System Universal Mounting Bracket Brand new is that the unit is secured with a single centrally located bolt, allowing the gearbox to be installed in virtually any position. The versatility of the reducer is complemented by the TriACflex elbow connector system which can be configured in any arrangement. A layout of elbows can be shown here with a legend: straight pipe connector, 90 and 60 degree elbows.
Advantages:
• small dimensions, • compact design, • excellent thermal efficiency, • stable settings, • resistance to LPG contamination, • stable supply independent of the gas bottle inlet pressure, • low pressure drops at high loads, • assembly with a single central bolt, • elbow connector system.
Material
two pieces molded in aluminum and a plastic lid hard and resistant
Magic III Power reducer 250to 350HP.The Magic reducer offers performance at the highest level thanks to a modern piston design. Its size allows installation even in vehicles with a small free space in the engine compartment. The reducer is designed to be fed by an 8mm diameter tube. Read below
Magic III Power 350HP gearbox.The Magic reducer offers performance at the highest level thanks to a modern piston design. Its size allows installation even in vehicles with a small free space in the engine compartment. The reducer is designed to be powered by a 6mm diameter tube. Read below
LONG LPG adapter in brass, France intended for the filling system internal thread diameter 16 (female Ø16) for Opel Agila, Meriva, Corsa originally fitted. before 2013 ATTENTION: There are 2 models of OPEL adapter / this model female Diameter 16 before 2013 and male (Diameter 14 after 2013)
Set of 4 Landi Renzo / Med "grey" LPG injectors, GI125-20 original assembly on Dacia, color of the GRAY mark, new generation injector, more efficient and more resistant. Replaces old yellow injectors
DO NOT MIX COLORS
(Discount by quantity reserved for professionals) see table below
LPG cap X50 " BRC " Internal Ø of thread 8, external thread Ø10. This cap is mounted on all BRC systems and also adaptable to many LPG cups originally fitted to Citroën xsara, berlingo, jumpy, Peugeot 406, partner, Fiat IMPORTANT LPG caps are compulsory on your LPG vehicle and in particular during your technical inspection
4 Landi Renzo / Med "Orange" LPG injectors, original fitting on FIAT EOM (Punto, Panda...) color of the Orange mark (Replaces the green injectors) specific MTA connectors FIAT EXCLUSIVE
Vialle LPI V17 LPG injector (orange color) Power: 20-26 KW / cylinder These are the last 4 IN STOCK ATTENTION: ITEMS ARE NOT RETURNED OR EXCHANGED. Vialle has ceased operations.
Brass 6-point LPG injector nozzle for connecting LPG injector pipes to the intake manifold.
Ø5 / M6 / 28 mm
Outside diameter of the nozzle / 6mm
Total height 28mm
pipe location height 12mm
Ø of the pipe location 5mm
Long LPG filling adapter (96 mm) This 96mm long LPG adapter is ideal for refueling your vehicle in Spain . Designed for 10mm diameter filling systems, it is compatible with the following makes and models: Brands: BRC , Landi Renzo Vehicles: Dacia, Renault, Chevrolet Spark, Aveo, Matiz The majority of LPG cups installed as standard or not. This adapter is...
KIT STAG 400 DPI DIRECT INJECTION 3 or 4 CYL (to be specified when ordering)
This STAG 400 DPI kit allows the perfect operation in LPG of vh in direct injection. high reliability kit
List of vehicles by brand according to the engine codes developed by STAG DOWNLOAD HERE or by typing the ENGINE CODE
The AC STAG R02 single stage LPG pressure reducer supplied complete with solenoid valve is designed for sequential injection systems. This vaporizer is used to reduce the pressure of liquid LPG flowing from the tank and transform it into a gaseous phase (vaporization).
Outlet Pressure Adjustable 0.9 to 1.5 bar / 110kW/150hp
