Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 10.3-12.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø5 int and Ø11 ext
(Discount by quantity) see table below
Vapo LPG regulator AC STAG R01 250HP Sold with LPG solenoid valve, temperature sensor & screws
The STAG R01 pressure reducer ensures stable and continuous pressure while providing precise fuel metering to LPG injectors. It is easily installed in cars with engines up to 250HP (red), especially turbocharged.
The STAG R01 vapor regulator ensures stable and continuous pressure while providing precise fuel metering to
lpg injectors
Due to its small size, the regulator vape can be easily installed in all cars with engines up to 150 HP (black) or up to 250 HP (red), especially turbocharged ones.
The high efficiency and thermal stability of the STAG R01 reducer guarantee:
stable pressure and accurate fuel metering under sudden acceleration and increased engine load, correct gas temperature whatever the driving conditions, correct vaporization of gas, even at exceptionally low ambient temperatures.
UFI Gas Filter Ø14 UFI-FC08 Ø 50 mm – Ø 14 mm fittings without bar
UFI gas filter designed to ensure efficient filtration of the gas circuit and protect the components of the fuel system.
Technical specifications
Body diameter: 50 mm
Total length: 122 mm
Filter body length: 70 mm
Diameter of inlet/outlet fittings (without bar): 14 mm
Mounting on gas...
ICOM Type LPG Adapter Ø 12 mm – France / Italy This LPG filling adapter is specially designed for vehicles equipped with a Ø 12 mm, Height 60mm filling system, for use in France and Italy.
LPG cartridge filter for ROMANO solenoid valve + seals
Height in mm (h)24mm
Outer diameter in mm 35.5
Thread diameter 8.5
(Discount by quantity reserved for professionals)
See table below
This original Landi Renzo switch (ref. 425320000-M45 , equivalent to Renault 251902183 R ) is the one fitted as factory equipment on a wide range of Renault and Dacia LPG vehicles, as well as on Landi Renzo LPG kits intended for the Omegas Plus system.
Equivalent to a Renault product, distributed at a lower price via AIRGPL
Product in stock
Brass cap with O-ring Ø10 x1 Height 19mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Straight hose on one side and bent at 90° on the other. Total length 1m25 for Dutch type filling (Céodeux) (adaptable on many vehicles with GZWM , WVM, STAKO type tank ...)
3 Cylinder GREEN LPG Injector Rail DACIA DUSTER WITH WATER CIRCUIT OEM175233231R-F7 – Landi Renzo with Integrated Cooling Circuit
This green 3-cylinder LPG injector rail, designed by Landi Renzo , is equipped with coolant pipes (model with integrated water circuit).
Applications:This model is commonly fitted to 1.0 litre turbo engines from 2020 onwards,...
LPG filler cap type " LOVATO " external diameter of the thread Ø 14 mm IMPORTANT LPG caps are compulsory on your LPG vehicle and in particular during your technical inspection
EMER NGV1-P30 CNG filling nozzle – Approval E3-110R-003007
EMER NGV1-P30 type CNG (Compressed Natural Gas) filling nozzle, intended for vehicles running on methane (CNG/CNG).
Manufactured to EMER OEM specifications and approved E3-110R-003007, this nozzle ensures safe and reliable filling of compressed natural gas tanks.
Features: SEE BELOW
Landi Renzo OMEGAS EVO & EVO12 LPG Switch – Green LEDGenuine LPG switch compatible with Landi Renzo OMEGAS EVO and OMEGAS EVO12 systems, equipped with a green LED . It allows easy selection of petrol/LPG operation while displaying the LPG fuel level.Before ordering, you must check the type of connector on your vehicle to ensure compatibility.➡️ Check...
Vapo LPG regulator AC STAG R01 250HP Sold with LPG solenoid valve, temperature sensor & screws
The STAG R01 pressure reducer ensures stable and continuous pressure while providing precise fuel metering to LPG injectors. It is easily installed in cars with engines up to 250HP (red), especially turbocharged.
