Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 22.4-25.6mm stainless steel construction,
ideal for tightening hoses for LPG injectors Ø16 INT and Ø24 EXT
(Discount by quantity) see table below
LPG Adapter Type ICOM Ø 12 mm – France / Italy, Height 60mm
This LPG filling adapter is specially designed for vehicles equipped with a Ø 12 mm filling system, for use in France and Italy.
Main features:
Internal thread Ø 12 mm, compatible with DISH filling ports.
Simple and straightforward format: easily screws onto the existing fitting, without modification.
Suitable for LPG service stations in France and Italy (DISH type fitting).
Made from robust material (brass or treated alloy) to ensure sealing and durability.
Height 60mm
Why this adapter? Thanks to its specific 12 mm diameter and compatibility with the DISH system, it allows for a reliable and secure connection when refueling with LPG in the countries concerned. An ideal choice if your vehicle is equipped with a 12 mm DISH-type filler neck and you drive in France/Italy.
Installation and usage instructions:
Check that your filling orifice has a Ø 12 mm DISH type thread.
Before installation, clean the threads and replace the seal if necessary to ensure a perfect seal.
When refueling, ensure that the adapter is screwed on correctly and that the LPG pump indicator shows "ready to fill".
If you change your vehicle or filling system, be sure to check compatibility before use.
Note: This product is intended solely for LPG filling systems with a 12 mm diameter DISH connection for use in France and Italy. For other formats (14 mm diameter, M10, M16, etc.) or other connection standards (e.g., ACME), please select the appropriate adapter.
BRC LPG filler cup (original equipment) – for mounting in the fuel filler flap
This cup provides the original LPG filling connection on Citroën or Chevrolet vehicles factory-equipped with the BRC system. It is designed to be installed directly at the fuel filler flap, offering a reliable and discreet solution.
⚠️ Please note: The product is sold alone ,...
Pitagora AEB160-U 6-cylinder emulator with universal harness allowing the cut-off and emulation of gasoline injectors when the engine is in Gas mode. Universal beam
Emulators distributed by AIRGPL and in its network of LPG garages
Flashlube in a 500ml bottle, this LPG lubricant has been specially designed to replace lead,
in order to reduce the wear of valves and valve seats to a minimum on certain LPG, CNG engines known to be fragileAIR GPL ® is the official distributor of Flashlube products. These products are sold in the garages of the AIRGPL network
New OMVL “CPR” 1.2 bar LPG pressure regulator. This new very compact reducer, for sequential multipoint LPG system for engines with power up to 120kW (163HP).
On command
BRC MTM (Roxer) AT 90 >140 kw Regulator vapo Super Oversize pipe diameter 8, original vapo for BRC Eco gas assembly, just, blitz, lambda gas, ect, also ideal for replacing vapes on LPG assemblies other brand in controlled carburetion "said in aspirated"
European LPG adapter (64mm) Ø EXT 10, recommended for Chevrolet, DACIA SANDERO STEPWAY, Renault, Fiat, Ford and many LPG cups " Recommended mainly for refueling in Spain or Portugal" inside the thread of your cup Ø8
GZWM brand inner toric tank with a diameter of 680, a height of 300 mm and a capacity of 88 L , waterproof cover and vents, sold without multi-valve available in the LPG tank or Multi-valve accessories section. LPG tanks reserved for professionals. Delivery time between 5 and 7 days / PRO RATE by logging in Professionals contact us
Liquid ICOM tank Ø 650 height 270 mm capacity 76L, included pump, multiway valve (both pre-assembled), cables and fixing materials supplied. LPG tanks reserved for professionals. Delivery time BETWEEN 5 AND 7 DAYS (No recovery in case of order error on your part) / PRO RATE by identifying yourself Professionals contact us
LPG filter LANDI RENZO LARGE MODEL Ø14 with bar at the ends to connect the
hoses. body diameter Ø58 and body length 81mm. This filter is fitted as standard on FIAT / DACIA DUSTER / OPEL
(Discount by quantity reserved for professionals)
See table below
Valtek LPG solenoid valve Ø8 for Prins VSI 1 and VSI 2 regulator vaporizers. This solenoid valve provides an economical replacement for the solenoid valve fitted to certain Prins regulator vaporizers with Ø8 mm LPG connection. Ideal for repairing and maintaining Prins VSI LPG systems, it allows you to replace a faulty solenoid valve without replacing the...
Original interface cable for programming LPG EuropeGas systems distributed by the importer AIRGPLRESERVED EXCLUSIVELY FOR AUTOMOTIVE PROFESSIONALS OF THE AIR GPL NETWORK
Liquid ICOM tank Ø 580 height 220 mm capacity 44L, included pump, multiway valve (both pre-assembled), cables and fixing materials supplied. LPG tanks reserved for professionals. Delivery time BETWEEN 5 AND 7 DAYS (No recovery in case of order error on your part) / PRO RATE by identifying yourself Professionals contact us
