Reference: FL01A24

Brand: AIR GPL

UNIVERSAL FILTER Ø14 FL01A24

(0)
Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01 PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
€14.17 €15.75
More
(Discount by quantity reserved for professionals) See table above

Reference: FPG2512-A25

FILGAZ FILTER FPG25 DACIA RENAULT LPG Ø12 FPG2512-A25

(0)
FILGAZ FPG25 LPG filter Ø12X12 (Discount by quantity reserved for professionals) See table below "Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...  
€14.17
More
In stock

Reference: LR0275FKN208A-13 674072000

Brand: Landirenzo

FILTER DACIA OPEL LI02-IG1 LR0275FKN208-A13

(0)
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident . Discount by quantity reserved for professionals See table below
€4.95
More
Last items in stock

Reference: 5720-KN235-A14

Brand: Landirenzo

LI10 5720-KN235-A14 Vapor Filter-Solenovalve

(0)
Landi Renzo LI10 LPG liquid filter with seals – Vapor regulator solenoid valve Ensure the proper functioning and longevity of your LPG installation with this Landi Renzo LI10 compatible liquid phase filter , supplied with its sealing gaskets . Designed to be installed on the liquid solenoid valve of the LI10 vaporizer-regulator , this filter ensures...
€9.08
More
In stock
All best sellers
  • Banner

KEIHIN KN8 Orange 63cc LPG Injector – PRINS VSI – KE0335-E17
  • KEIHIN KN8 Orange 63cc LPG Injector – PRINS VSI – KE0335-E17
  • KEIHIN KN8 Orange 63cc LPG Injector – PRINS VSI – KE0335-E17
  • KEIHIN KN8 Orange 63cc LPG Injector – PRINS VSI – KE0335-E17

KEIHIN KN8 Orange 63cc LPG Injector – PRINS VSI 1 / VSI 2 KE0335-E17

KE0335-E17 ORANGE

KEIHIN KN8 Orange LPG Injector – 63 cc

Orange KEIHIN KN8 LPG injector, intended for PRINS VSI 1, PRINS VSI 2 and EUROGAS sequential LPG injection systems, subject to compatibility with the original assembly.

  • Nominal flow rate: 63 cc

  • Power range indicated: 16.5 to 27.5 kW

  • Available colours: blue, orange, yellow and white

Warning: this model does not directly replace older generation KEIHIN injectors.


Distributed by AIRGPL in France and Europe – fast delivery.

€210.00
Quantity
Last items in stock

Description

The Keihin KN8 is the original injector fitted to Prins VSI LPG systems. Manufactured by the Japanese company Keihin, a long-standing partner of Prins, it ensures precise gas metering to each cylinder and guarantees smooth operation, controlled consumption, and a long service life.

This orange model corresponds to the 63cc caliber. It is suitable for medium-power engines, with a range of 16.5 to 27.5 kW per cylinder. The choice of caliber depends directly on the engine's power: for replacement, simply choose the same color as the original injector, indicated by the color code on the label.

The KN8 injector is compatible with Prins VSI I, Prins VSI II, and Eurogas systems. It is not compatible with older generation injectors: check the type of injector fitted to your vehicle before ordering.

Several variations are available: blue, orange, yellow, and white. Select your desired color before adding the item to your cart.

This is the ideal part to replace a faulty injector (misfires, jerking, fault codes on one cylinder) or to repair a Prins rail, whether you are a mechanic, LPG installer or individual.

Distributed by AIRGPL in France and Europe – fast delivery.


Compatibility

  • Prins VSI I (VSI 1)
  • Prins VSI II (VSI 2.0)
  • Eurogas
  • Not compatible with older generation injectors

Technical specifications

Characteristic Value
Brand Keihin
Kind KN8
Caliber 63 cc (orange)
Power per cylinder 16.5 to 27.5 kW
Fuel LPG (and CNG depending on the distributors)
Injector approval E4 67R-010092 - E4 110R-000020
Caliber marker colored dot on the label
Advertised lifespan at least 290 million cycles, or approximately 240,000 km
State NINE

Available variations

Color Caliber Power per cylinder
White 43 cc to be confirmed
Blue 52 cc 13 to 20 kW
Orange 63 cc 16.5 to 27.5 kW
YELLOW 73 cc

Assembly instructions

  • Replace the injector with a model of the same color as the original, unless your installer has specified a different size.
  • Work with the engine off, the solenoid valve closed, and bleed the pressure from the circuit before dismantling the rail.
  • Replace the O-rings each time you disassemble and check that the fittings are properly tightened.
  • Check for leaks with a leak detector after reassembly.
  • If the caliber changes, readjust (calibrate) using the Prins software.
  • Take advantage of the service to check the condition of the gas phase filter.
  • Professional installation of LPG equipment is recommended.

Why order from AIRGPL?

  • LPG specialist : our team is familiar with Prins, Eurogas systems and the main brands on the market.
  • For professionals and individuals : garages, installers and motorists can find the right part with us.
  • VAT-free invoicing for EU professionals : register your intra-community VAT number to be invoiced without tax.
  • Advice before purchase : unsure about the caliber or compatibility? Contact us before ordering.

Distributed by AIRGPL in France and Europe – fast delivery.

Product Details
KE0335-E17 ORANGE
0
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: GZ-00-13-T49

Brand: AIR GPL

BRASS SHUTTER Ø13 X1.25 GZ-00-13-T49

(0)
Brass cap with O-ring Ø13 x 1.25 / thread height 8mmThis plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.33
More
Out-of-Stock

Reference: AD1543-T51

FRANCE GAS BOTTLE ADAPTER 11KG 3/8L AD1543-K25

(0)
Camping adapter for filling 11KG gas bottles, Cup type tip for France, Italy, Portugal... Possibility of adding another adapter for Belgium, Holland and other countries Filling of gas bottles prohibited in France On PROMO secure camper van bottle follow the link SECURE GAS BOTTLE
€22.67 €28.33
More
In stock

Reference: B742X1-B7

1/4 TURN LPG CAP B742 X1B7

(0)
1/4 turn cap, originally fitted on Chevrolet, Daewoo, Renault Twingo, Saab, Opel, Ford, VW and on many vehicles fitted by LPG installers ATTENTION LPG cap mandatory on your LPG vehicle and in particular during your technical inspection
€9.58
More
(Quantity discount reserved for professionals) see table below

Reference: JA2550

GAUGE 4 HOLES CYL Ø400X52°

(0)
LPG gauge for CYLINDRICAL LPG tank "4 holes" Ø400 mm X52° for cylindrical LPG tank GZWM , STAKO , WVM ... Item sold exclusively to professionals
€81.25
More
Last items in stock

Reference: ET16-B22

Brand: AIR GPL

POUCH 4 ADAPTERS Ø16 ET16-B22

(0)
Pack of 4 Ø16 Adapters for filling the LPG tank in Europe Nozzle for Italy/France, Spain, Germany, Belgium, Holland and other countries (see map in the images)
€54.17
More
In stock

Reference: BRN4860-16pc00030002fa-C22

Brand: BRC

LPG ADAPTER Ø10 CHEVROLET AVEO BRN4860-C22

(0)
LPG filling cup for Chevrolet AVEO, Matiz, Ø external thread 10 REPLACE WITH THE BRC ADAPTER more practical to put in place on the filling nozzle when using the LPG gun to fill the tank (Also suitable for many d10 cups) Peugeot Renaul, Citroen... (SEE also this link) BRC LPG adapter AND AVEO CUP
€24.58
More
In stock

Reference: GZ07-A-20-T53

Brand: AIR GPL

Y-FITTING Ø20X16X20 GZ07-A-20-T53

(0)
This Ø20 x 16 x 20 mm aluminum Y-fitting is specifically designed for connecting the water hoses of an LPG vaporizer . Thanks to its robust aluminum construction, it offers excellent resistance to corrosion, temperature variations, and cooling system pressure.
€4.60
More
In stock

Reference: h104515flex

NETHERLANDS FILLING CUP 90°

(0)
Filling cup Netherlands 90° for flexible pipe (Holland, England...) see image "on order delay between 5 and 7 days"
€62.50
More
In stock

Reference: FL3111R

copy of RIGHT HOSE - RIGHT 1m75

(0)
Straight straight hose length 1m75 for Dutch type filling (Céodeux) (adaptable to many vehicles equipped with GZWM , STAKO , WVM ...)
€54.17
More
ON ORDER DELIVERY 3 TO DAYS

Reference: FL3115R

copy of RIGHT HOSE - RIGHT 1m75

(0)
Straight straight hose length 1m75 for Dutch type filling (Céodeux) (adaptable to many vehicles equipped with GZWM , STAKO , WVM ...)
€45.83
More
Last items in stock

Follow us on Facebook