Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 22.4-25.6mm stainless steel construction,
ideal for tightening hoses for LPG injectors Ø16 INT and Ø24 EXT
(Discount by quantity) see table below
LPG shut-off solenoid valve for refillable LPG cylinder, allowing the gas supply to household appliances to be cut off during filling or when the vehicle is stopped.
LPG shut-off solenoid valve for refillable LPG cylinder
This LPG shut-off solenoid valve allows the gas supply to the domestic part of a vehicle equipped with a rechargeable LPG cylinder to be interrupted.
It can be used to cut off the LPG supply to household appliances when filling the bottle or when the vehicle is parked and not in use.
Its operation thus allows control of the gas supply to the living area of the vehicle, particularly on LPG installations in motorhomes, converted vans and recreational vehicles .
Fittings suitable for LPG cylinders
This solenoid valve is equipped with specific fittings designed to be adapted to the LPG cylinders used on French installations .
Before placing any order, it is recommended to check the compatibility of the bottle, the connection and the existing installation.
Features
Type: LPG shut-off solenoid valve
Function: Cuts off the LPG supply
Application: power supply for the household appliances
Use: motorhome, campervan, recreational vehicle
Installation: LPG circuit for refillable cylinder
Connection: specific fittings adapted to French bottles
Operation: Power is cut off during refueling or when the vehicle is stationary.
Use
The solenoid valve allows the supply of LPG to household appliances to be cut off when necessary, particularly during the filling of the bottle or when the vehicle is not in service.
It provides a practical solution for managing the gas supply to the vehicle's domestic installation.
Important: Any work on an LPG system must be carried out in accordance with applicable safety regulations. Check the compatibility of this solenoid valve with your cylinder and system before installation.
Valtek solenoid valve for tank with plate or 4 holes for LPG tank Stako, Gzwm...
Article reserved for automotive professionals. nut diameter so Ø12.5
Diameter of inlet screwing on the tank Ø26.5
2 x "beaten collar" type nuts (Ø14.5X6mm) + (Ø12x6mm) intended for the copper assembly of Dutch-type LPG systems.
Suitable for connecting solenoid valves, pressure reducers and solenoid valves of plate/4-hole tanks and particularly STAKO LPG tanks, GZWM , WVM
Valtek solenoid valve – compatible with Vapo LPG (Nécam / MAGIC Ø6) This solenoid valve replaces and fits perfectly on the Nécam LPG pressure reducer and on the MAGIC Ø6 LPG vaporizer. comes with a male/male connector. This type of connection allows the solenoid valve to be connected directly to the MAGIC 1310 reducers in order to optimize time and space...
21.8 x1/4 adapter connection (left hand thread) to a Ø8 thermoplastic flexible outlet (Faro type) see images
used to connect the manual outlet valve (21.8 mm) with a hose to the regulator (Truma GOK or other)
MANUAL TAP 21.8 mm outlet designed for household cistern lyres (plate or 4 holes)
Stako, Gzwm... For added security, it is possible to fit an electric solenoid valve instead of this tap (contact us)
Article reserved for automotive professionals
Replacement magnetic core compatible with Landi Renzo LI10 vaporizers. This moving part is actuated by the electromagnetic coil to open or close the LPG passage. It ensures a tight seal at the gas outlet when the solenoid valve is not powered. Compatible with Landi Renzo LI10 regulators fitted to many original LPG vehicles.
EMER CNG solenoid valve coil for Citroën C3 CNG tank
EMER solenoid coil compatible with many CNG tanks, including those fitted to certain Citroën C3 CNG models . This replacement coil ensures reliable operation of the solenoid valve and is an ideal solution for the maintenance or repair of your CNG system.
1/4-flexible thermoplastic adapter fitting Ø6 (Faro type) see images used to connect the 1/4 NPTF manual outlet valve with a hose to the regulator ( TRUMA GOK or other) (Connection sold alone)
Solenoid valve with male part to screw directly onto the LANDI RENZO LIO2 type steam regulator. This solenoid valve is originally fitted to Dacia vehicles.
(Please note, the connector may be different)
LPG shut-off solenoid valve for refillable LPG cylinder, allowing the gas supply to household appliances to be cut off during filling or when the vehicle is stopped.
