Home
Brands
Best Sellers
-10% On sale! Reduced price UNIVERSAL FILTER Ø14 FL01A24

Reference: FL01A24

Brand: AIR GPL

UNIVERSAL FILTER Ø14 FL01A24

(0)
Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01 PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
€14.17 €15.75
More
(Discount by quantity reserved for professionals) See table above
On sale! FILGAZ FILTER FPG25 DACIA RENAULT LPG Ø12 FPG2512-A25

Reference: FPG2512-A25

FILGAZ FILTER FPG25 DACIA RENAULT LPG Ø12 FPG2512-A25

(0)
FILGAZ FPG25 LPG filter Ø12X12 (Discount by quantity reserved for professionals) See table below "Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...  
€14.17
More
In stock
On sale! LPG GAS BOTTLE ADAPTER 13KG GZ2010-C50

Reference: AD6147-GZ2010-C50

Brand: AIR GPL

LPG GAS BOTTLE ADAPTER 13KG GZ2010-C50

(0)
Adapter for filling 13Kg gas bottles. Cup for France, Italy, Portugal. Possibility of adding another adapter for other countries Filling of gas cylinders prohibited in France and ItalyAdapter sold without seal! (sealing is metal to metal) On PROMO secure camper van bottle follow the link SECURE GAS BOTTLE DIRECT ACCESS A DEMONSTRATION OF LPG BOTTLE FILLING
€24.17
More
In stock
On sale! FILTER DACIA OPEL LR0275FKN208-A13

Reference: LR0275FKN208A-13 674072000

Brand: Landirenzo

FILTER DACIA OPEL LI02-IG1 LR0275FKN208-A13

(0)
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident . Discount by quantity reserved for professionals See table below
€4.95
More
In stock
All best sellers

  • Banner

Active filters
NOZZLE PIPE INJECT BRC OLD MOD 5346-47-E22

Reference: 5346-47-E22

Brand: BRC

BRC INJECT HOSE NOZZLE OLD MOD 5346-47-E22

(0)
Old model LPG injector nozzle for screwed injector usable with nozzles BU5345-E22 or BU05-E24 allowing to connect the injector pipes with screwed brc injectors
€4.92
More
In stock
GATES T COUPLING Ø 5X5 28631-T1

Reference: 28631-T1

Brand: GATES

FITTING GATES T Ø 5X5 28631-T1

(0)
T Gates Water or LPG coupling allowing to connect 3 hoses together; 6x6x6 High quality GATES brand coupling
€4.70
More
(Discount by quantity reserved for professionals) see table below
COPPER FITTING Ø8 RA608GS538S-M26

Reference: RA608GS538S-M26

COPPER CONNECTION Ø8 RA608GS538S-M26

(0)
Connection allowing the connection of Ø8 copper pipes with an LPG solenoid valve or a polyvalve ( connection length 17mm)
€2.34
More
In stock
FITTING COPPER Ø8 FLEXIBLE Ø 6 RA6295

Reference: RA6295-GZ2394A-L23

Brand: FARO

COPPER FITTING Ø8 FLEXIBLE Ø 6 RA6294A-L23

(0)
fitting complete with olive and nut, for Ø8 copper pipe with a Ø 6 hose (Discount by quantity reserved for professionals) see table below
€4.50
More
(Discount by quantity reserved for professionals) see table below
JOINT POLYVANNE 6 HOLES JO2314-P4

Reference: JO2314/24194-P4

MULTIVALVE GASKET 6 HOLES JO2314-P4

(0)
Gasket for 6-hole multivalve compatible with multivalve, BRC , OMB, Tomasetto, LANDI RENZO, OMVL , ICOM ... Article reserved for automotive professionals
€4.50
More
Article reserved for automotive professionals
On sale! Beaten collar device for LPG pipe

Reference: colbat1

Brand: AIR GPL

BATTERED COLLAR DEVICE

(0)
Apparatus for making beaten collars. Very useful for connecting Ø6 or 8 copper pipes to certain solenoid valves.
€24.90
More
Last items in stock
Online only SCREW FOR FLEXIBLE LPG FIXING (X100) VI0028-R19

Reference: VI12-36

Brand: AIR GPL

WASHERS X10 Ø12 int X Ø ext 36

(0)
Set of 10 WASHERS Ø INT 12 X Ø EXT 36 ideal for fixing LPG tanks Discount by quantity reserved for professionals) see table below
€4.90
More
(Discount by quantity reserved for professionals) see table below
Online only SCREW FOR FLEXIBLE LPG FIXING (X100) VI0028-R19

Reference: TI8

Brand: AIR GPL

THREADED ROD Ø 8 LENGTH 1M

(0)
Threaded rod Ø8 length 1 meter Discount by quantity reserved for professionals) see table below
€3.25
More
(Discount by quantity reserved for professionals) see table below
On sale! COPPER FITTING Ø6 FLEXIBLE Ø6 RAGZ2392-L23

Reference: RAGZ6294-GZ2393A-L23

Brand: FARO

COPPER FITTING Ø6 FLEXIBLE Ø8 RAGZ2393A-L23

(0)
fitting complete with olive and nut, for Ø6 copper pipe with Ø6 FARO hose (Discount by quantity reserved for professionals) see table below
€4.50
More
(Discount by quantity reserved for professionals) see table below
Online only SCREW FOR FLEXIBLE LPG FIXING (X100) VI0028-R19

Reference: TI-10

Brand: AIR GPL

THREADED ROD Ø 10 LENGTH 1M

(0)
Threaded rod Ø10 length 1 meter used to fix LPG tanks Discount by quantity reserved for professionals) see table below
€4.08
More
(Discount by quantity reserved for professionals) see table below
FITTING GLUE BEAT VAPO Ø6 RA0571

Reference: RA0571-L26

Brand: FARO

SPRAYED GLUE FITTING Ø6 RA0571-L26

(0)
Beaten glued reducer LPG fitting for Ø6 pipe of Ø10 external thread used on tomasetto vapes for replacement of Necam Koltec vapes (Discount by quantity reserved for professionals) see table below
€1.80
More
(Discount by quantity reserved for professionals) see table below
Online only SCREW FOR FLEXIBLE LPG FIXING (X100) VI0028-R19

Reference: TI-12

Brand: AIR GPL

THREADED ROD Ø 12 LENGTH 1M

(0)
Threaded rod Ø12 length 1 meter used to fix LPG tanks Discount by quantity reserved for professionals) see table below
€5.79
More
(Discount by quantity reserved for professionals) see table below
On sale! LOCTITE 545 FOR LPG/CNG CONNECTION LO545-H15

Reference: LO545-H15

Brand: AIR GPL

PTFELOCK(CAMP) 50ml PTFE-H15

(0)
Professional Anaerobic Sealant PTFE LOCK (CAMP) 50 mlHigh-performance sealant for threaded fittings DescriptionCAMP brand PTFE LOCK is a one-component, anaerobic solution enriched with PTFE, designed to ensure reliable and durable sealing of metal threaded fittings. It forms an elastic film that is extremely resistant to thermal shock, vibration and...
€14.92
More
Last items in stock
SPACER Z 5 cm FOR RESERVOIR GPL

Reference: Z5

Brand: AIR GPL

(a) SPACER Z LPG TANK 40X60X40 mm

(0)
1 Z-shaped spacer height IN GAVANIZED STEEL 40x60x40 mm thickness 5mm. Ideal for fixing under the floor of GZWM , WVM, STAKO or STEP type LPG tanks with 4 or 5 fixing points
€8.25
More
In stock
SPACER Z 5 cm FOR RESERVOIR GPL

Reference: Z5

Brand: AIR GPL

5 X TYPE Z SPACERS LPG TANK 40X60X40 mm

(0)
set of 5 Z-shaped spacers height IN GAVANIZED STEEL 40x60x40 mm, thickness 5mm. Ideal for fixing under the floor of GZWM , WVM, STAKO or STEP type LPG tanks with 4 or 5 fixing points
€37.00
More
In stock
LPG INJECTOR NOZZLE Ø5-M6 BU291A-E22

Reference: BU291A-E22

LPG INJECTOR NOZZLE Ø5-M6 BU291A-E22

(0)
Brass 6-point LPG injector nozzle for connecting LPG injector pipes to the intake manifold. Ø5 / M6 / 28 mm Outside diameter of the nozzle / 6mm Total height 28mm pipe location height 12mm Ø of the pipe location 5mm
€1.58
More
In stock
GZ-4001-L31 Rotating LPG Filling Plate Reducer

Reference: GZ-4001-L31

GZ-4001-L31 Rotating LPG Filling Plate Reducer

(0)
360° rotating LPG filling fitting – 3/4 → Ø 8 mm360° rotating LPG fitting, type 3/4-Ø8, ideal for connecting the GZWM or STAKO type plate tank filling system, allowing the replacement of a Dutch-type hose with an Ø8 hose (see example in photo 2).
€14.17
More
(Quantity discount reserved for professionals) see table below
SPACER Z 5 cm FOR RESERVOIR GPL

Reference: 50X40X60

Brand: AIR GPL

(c) SPACER Z LPG TANK 50X40X50 mm

(0)
1 Z-shaped spacer height IN GAVANIZED STEEL 50x40x50 mm thickness 5mm. Ideal for fixing under the floor of GZWM , WVM, STAKO or STEP type LPG tanks with 4 or 5 fixing points
€8.25
More
In stock
90° ROTATING REDUCER LPG FILLING WITH PLATE GZ-4002-L31

Reference: GZ-4002-L31

90° ROTATING REDUCER LPG FILLING WITH PLATE GZ-4002-L31

(0)
3/4-Ø8 type LPG fitting rotating over 360°, Ideal for connecting the GZWM OR STAKO TYPE PLATE TANKS FILLING SYSTEM allowing the replacement of a Dutch type hose by a Ø 8 hose see example photo 2
€19.08
More
(Discount by quantity reserved for professionals) see table below
On sale! 90° LPG INJECTOR NOZZLE GZ-33-30-E22

Reference: GZ-33-30-E22

Brand: AIR GPL

90° LPG INJECTOR NOZZLE GZ-33-30-E22

(0)
90° LPG injector nozzle + 5/6mm diameter hose fitting 90° angle : 90° angled nozzle for compact and convenient connection in tight spaces. Hose compatibility : fitting designed for Ø 5 mm and Ø 6 mm hoses, facilitates the connection of LPG injector pipes. Use : allows for efficient connection of LPG injector pipes to the rail or pipeline. Robust...
€1.90
More
In stock
SPACER Z 5 cm FOR RESERVOIR GPL

Reference: 40X40X40

Brand: AIR GPL

(e) SPACER Z LPG TANK 40X40X40 mm

(0)
1 Z-shaped spacer height IN GAVANIZED STEEL 40X40X40 mm thickness 5mm. Ideal for fixing under the floor of GZWM , WVM, STAKO or STEP type LPG tanks with 4 or 5 fixing points
€8.25
More
In stock
-40% Reduced price LANDI RENZO LR2549-M39 LPG TEMPERATURE PROBE

Reference: LR2549-M39

Brand: Landirenzo

LANDI RENZO LR2549-M39 LPG TEMPERATURE PROBE

(0)
Landi Renzo water temperature probe Ø15 x 15 mm – without connector, Plug & Play Landi Renzo water temperature probe Ø15 x 15 mm This sensor is originally fitted on several Opel vehicles equipped with a Landi Renzo LPG system . This probe allows the temperature of the coolant to be measured in order to optimize the management of the LPG system and the...
€14.50 €24.17
More
In stock
SPACER Z 5 cm FOR RESERVOIR GPL

Reference: 40X40X40

Brand: AIR GPL

(f) 5 X TYPE Z SPACERS LPG TANK 40X40X40 mm

(0)
set of 5 Z-shaped spacers height IN GALVANIZED STEEL 40x40x40 mm, thickness 5mm. Ideal for fixing under the floor of GZWM , WVM, STAKO or STEP type LPG tanks with 4 or 5 fixing points
€37.00
More
In stock
SPACER Z 5 cm FOR TANK LPG

Reference: 40X40X40

Brand: AIR GPL

(g) U TYPE SPACER - LPG TANK 40X40X40 mm

(0)
1 Z-shaped spacer height IN GAVANIZED STEEL 40X40X40 mm thickness 5mm. Ideal for fixing under the floor of GZWM , WVM, STAKO or STEP type LPG tanks with 4 or 5 fixing points
€8.25
More
In stock
On sale! LPG PIPE KIT Ø5 INLET MANIFOLD RAGZ2300-E16

Reference: RA0732-E24

Brand: AIR GPL

LPG PIPE KIT Ø5 INLET MANIFOLD RAGZ2300-E16

(0)
Straight connector – Special LPG admission Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting! This straight fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the performance of your LPG...
€4.54
More
In stock
POLYVVANNE FITTING Ø8 FLEXIBLE Ø8 RA0806

Reference: RA0806

Brand: FARO

MULTIVALVE COUPLING Ø8 FLEXIBLE Ø8 RA0806

(0)
LPG connector Ideal for connecting the LPG outlets of polyvalves, solenoid valves or vaporizers with a Ø 8 FLEXIBLE pipe (Sold with nut & olive) (Discount by quantity reserved for professionals) see table below
€3.60
More
Last items in stock
-15% Reduced price Tubing kit for injector RA0732-E24

Reference: RA0732-E24

Brand: AIR GPL

LPG PIPE KIT Ø6 INLET MANIFOLD RA0732-E24

(0)
Straight connector with Ø6 Polyamide pipe – Special LPG admission Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting! This straight fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the...
€3.86 €4.54
More
In stock
SPACER Z 5 cm FOR TANK LPG

Reference: U

Brand: AIR GPL

(h) 5 X SPACERS TYPE U LPG TANK 40X40X40 mm

(0)
set of 5 U-shaped spacers height IN GALVANIZED STEEL 40x40x40 mm, thickness 5mm. Ideal for fixing under the floor of GZWM , WVM, STAKO or STEP type LPG tanks with 4 or 5 fixing points
€37.00
More
In stock
90° LPG ELBOW PIPE KIT Ø6 INLET MANIFOLD RA2306-E18

Reference: RA0732-E24

Brand: AIR GPL

90° LPG ELBOW PIPE KIT Ø6 INLET MANIFOLD RA2306-E18

(0)
90° Elbow Connector with Ø6 Polyamide Pipe – Special LPG Admission Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting! This 90° elbow fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the...
€4.54
More
In stock
LANDI RENZO+ TEMP PROBE LR0226-M39 Connector

Reference: LR0226-M39

Brand: Landirenzo

Landi Renzo LPG Temperature Probe with LR0226-M39 Connector

(0)
Buy the Landi Renzo Ø15x15 water temperature probe for LPG systems Supplied with Plug & Play connector for quick installation. Certified part. This probe is originally fitted on several Opel vehicles equipped with a Landi Renzo LPG system and allows the temperature of the coolant to be measured in order to optimize the management of the LPG system and...
€33.25
More
In stock
90° LPG ELBOW PIPE KIT INLET MANIFOLD RA2306-E18

Reference: RA0732-E24

Brand: AIR GPL

copy of 90° LPG ELBOW PIPE KIT INLET MANIFOLD RA2306-E18

(0)
90° Elbow Connector with Ø6 Polyamide Pipe – Special LPG Admission Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting! This 90° elbow fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the...
€4.54
More
In stock
On sale! THERMAL PROTECTION PLATE ALUMINUM 33X33 cm PR3378

Reference: PR0708-H1

Brand: AIR GPL

LPG TANK PROTECTIVE FOAM 50M PR0708-H1

(0)
Roll of protective foam used to isolate LPG tanks, so that the tanks are not in contact with the metal of the vehicle (roll of 50M width 5 cm, thickness 3 mm) this adhesive protection to stick on the LPG tank or on a Protection plate. Essential for certain LPG assembly
€33.55
More
(Discount by quantity reserved for professionals) see table below
ADAPTER 21.8 X 1/4 TO 8MM FLEXIBLE AD2788-i9

Reference: AD2788-19252-i9

Brand: AIR GPL

ADAPTER 21.8 X 1/4 TO FLEXIBLE 8MM AD2788-i9

(0)
21.8 x1/4 adapter connection (left hand thread) to a Ø8 thermoplastic flexible outlet (Faro type) see images used to connect the manual outlet valve (21.8 mm) with a hose to the regulator (Truma GOK or other)
€16.25
More
In stock
TUBE KIT FOR INJECTOR RA0732-E24

Reference: GZ-WT-/33/11

Brand: AIR GPL

LPG PIPE GZ-WT-/33/11

(0)
POLYAMIDE TUBE Ø EXT 6mm Ø inter 3.2mm useful for tubing and extending LPG or CNG injectors Great ease of installation Tube sold by the meter (example 3 meters purchased you / receive a length of 3 meters)
€1.97
More
In stock
BRASS PLUG Ø10 X 1 GZ-19-18-J32

Reference: GZ-19-08-J32

Brand: AIR GPL

BRASS PLUG Ø6 X 1 GZ-19-08-J32

(0)
Brass cap with O-ring Ø06 x1 Height 10mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.17
More
In stock
STRAP FOR LPG TANK Ø 300 BR300

Reference: BR315

Brand: BRC

STRAP FOR LPG TANK Ø 315 BR315

(0)
2 Fixing straps for cylindrical LPG tank Ø 315mm x strap width 4 cm FOR TANK Ø315 mm DELIVERED WITH BACK PLATE + BOLTS On order, “Other dimensions contact us” CALCULATION NOTE FOR THESE STRAPS.
€144.83
More
ON COMMAND
BRASS PLUG Ø12 X 1.25 GZ-00-05-J32

Reference: GZ-00-03-J32

Brand: AIR GPL

BRASS PLUG Ø8 X 1. GZ-00-03-J32

(0)
Brass plug Ø8 pitch 100 Height 6mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.25
More
In stock
CYLINDRICAL LPG TANK FRAME Ø400X120L CA2631

Reference: SAN2615

CYLINDRICAL LPG TANK FRAME Ø400X120L CA2631

(0)
Mounting Frame for Cylindrical LPG Tanks Optimize the installation of your cylindrical LPG tanks with our robust mounting frame, specially designed to be installed inside your vehicle, on the loading floor of vans or utility vehicles. Ideal for LPG gas conversion kits, this frame ensures a secure and durable installation. Compliance and Security Our...
€157.50
More
ON ORDER ONLY DELIVERY 10 TO 15 DAYS
BRASS PLUG Ø10 X 1 GZ-19-18-J32

Reference: GZ-19-18-J32

Brand: AIR GPL

BRASS PLUG Ø10 X 1 GZ-19-18-J32

(0)
Brass cap with O-ring Ø10 x1 Height 19mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.17
More
In stock
Part Cylindrical 360/100L SAN4338

Reference: SAN4338

copy of LPG TANK FRAME Ø360/100L SAN4338

(0)
Cylindrical LPG Tank Frame Optimize the installation of your cylindrical LPG tanks with our robust mounting frame, specially designed to be installed inside your vehicle, on the loading floor of vans or utility vehicles. Ideal for LPG gas conversion kits, this frame ensures a secure and durable installation.
€119.00
More
In stock
1/4-FLEXIBLE FITTING Ø6 RA1319GZ239-i9

Reference: RA2391H7444

Brand: AIR GPL

1/4-FLEXIBLE CONNECTION Ø6 RA2391H7444-i9

(0)
1/4-flexible thermoplastic adapter fitting Ø6 (Faro type) see images used to connect the 1/4 NPTF manual outlet valve with a hose to the regulator ( TRUMA GOK or other) (Connection sold alone)
€8.25
More
In stock
BRASS PLUG Ø12 X 1.25 GZ-00-05-J32

Reference: GZ-00-05-J32

Brand: AIR GPL

BRASS PLUG Ø12 X 1.25 GZ-00-05-J32

(0)
Brass cap with O-ring Ø12 x1.25 Height 10mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.25
More
Last items in stock
1/4-FLEXIBLE CONNECTOR Ø8 RA2391H7443-i9

Reference: RA2391H7443

Brand: AIR GPL

1/4-FLEXIBLE CONNECTION Ø8 RA2391H7443-i9

(0)
1/4-flexible thermoplastic adapter fitting Ø6 (Faro type) see images used to connect the 1/4 NPTF manual outlet valve with a hose to the regulator ( TRUMA GOK or other) (Connection sold alone)
€9.08
More
In stock
BRASS PLUG Ø16X1.25 GZ-00-06-J32

Reference: GZ-00-13-J32

Brand: AIR GPL

BRASS PLUG Ø13 X1.25 GZ-00-13-J32

(0)
Brass cap with O-ring Ø13 x 1.25 / thread height 8mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.33
More
Last items in stock
On sale! CONNECTOR RIGHT FLEXIBLE Ø6 X Ø8 RA5007GZ5310

Reference: RA5007GZ5310-L43

Brand: FARO

STRAIGHT FLEXIBLE CONNECTOR Ø6 X Ø8 RA5007GZ5310-L43

(0)
Faro straight fitting complete with olive and nut, allowing to connect a Ø6 hose with a Faro Ø8 LPG copper fitting. (Discount by quantity reserved for professionals) see table below
€3.50
More
(Discount by quantity reserved for professionals) see table below
90° ELBOW FITTING 1/4-FLEXIBLE Ø6 RAG2363-i9

Reference: RAGZ2363-i9

Brand: AIR GPL

90° ELBOW CONNECTION 1/4-FLEXIBLE Ø6 RAG2363-i9

(0)
90° elbow adapter fitting 1/4-flexible thermoplastic Ø6 (Faro type) see images used to connect solenoid valves or manual outlet valve type Céodeux-SRG '1/4 NPTF male or female) with a flexible type FARO Ø6 (Connection sold alone)
€7.42
More
In stock
BRASS PLUG Ø16X1.25 GZ-00-06-J32

Reference: GZ-00-06-J32

Brand: AIR GPL

BRASS PLUG Ø14 X1.25 GZ-00-06-J32

(0)
Brass cap with O-ring Ø14 x 1.25 / thread height 8mmThis plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.45
More
In stock
FLEXIBLE COPPER ELBOW FITTING Ø6X8 RA1248

Reference: RA1248-L45

Brand: FARO

FLEXIBLE COPPER ELBOW FITTING Ø6X8 RA1248-L45

(0)
Faro long elbow fitting with nut and olive – Copper inlet Ø 6 / Faro flexible LPG outlet Ø 8 Long Faro elbow fitting, supplied with nut and olive . Allows a reliable connection between a 6 mm diameter copper pipe and an 8 mm diameter Faro LPG hose. 👉 Ideal for precise and durable gas installations.
€5.12
More
(Quantity discount reserved for professionals) see table below
90° ELBOW FITTING 1/4-FLEXIBLE Ø6 RAG2363-i9

Reference: RAGZ2363-i9

Brand: AIR GPL

90° ELBOW CONNECTION 1/4-FLEXIBLE Ø8 RAG2364-i9

(0)
90° elbow adapter fitting 1/4-flexible thermoplastic Ø8 (Faro type) see images used to connect solenoid valves or manual outlet valve type Céodeux-SRG '1/4 NPTF male or female) with a flexible type FARO Ø6 (Connection sold alone)
€7.42
More
In stock
BRASS PLUG Ø16X1.25 GZ-00-06-J32

Reference: GZ-00-06-J32

Brand: AIR GPL

BRASS PLUG Ø16 X1.25 GZ-00-06-J32

(0)
Brass cap with O-ring Ø16 x 1.25 / thread height 8mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
€1.45
More
Last items in stock
M1/4-FLEXIBLE FITTING Ø8 RAG3285A-i9

Reference: RAG3285A-i9

Brand: AIR GPL

M1/4-FLEXIBLE CONNECTION Ø8 RAG3285A-i9

(0)
Male 1/4-flexible thermoplastic adapter fitting Ø8 (Faro type) see images used to connect the 1/4 NPTF manual outlet valve with a FARO Ø8 type hose (Connection sold alone)
€7.92
More
In stock
COPPER TUBE KIT FOR RA1494-E24 INJECTOR

Reference: RA1494GZ2401-E24

Brand: AIR GPL

COPPER TUBING KIT FOR INJECTOR RA1494GZ2401-E24

(0)
Connector for tubing and extending LPG or CNG injectors with Ø6 copper pipes. This type of kit allows better gas injection on certain engines. Sold with the shaped copper tube
€6.90
More
In stock
M1/4-FLEXIBLE FITTING Ø6 RAG3685A-i9

Reference: RAG3685A-i9

Brand: AIR GPL

M1/4-FLEXIBLE CONNECTION Ø6 RAG3685A-i9

(0)
Male 1/4-flexible thermoplastic adapter fitting Ø6 (Faro type) see images used to connect the 1/4 NPTF manual outlet valve with a FARO Ø6 type hose (Connection sold alone)
€7.92
More
In stock
LPG injection fitting / intake manifold RA3402-01-E20

Reference: GZ340234019181-E20

Brand: AIR GPL

LPG injection fitting / intake manifold RA3402-01-E20

(0)
Straight fitting Ø 6 mm – Special for LPG injection / intake manifold Give your engine a high-performance and easy-to-install solution for your LPG injection system. ✅ Technical specifications Ø 6 mm inlet and outlet nozzles suitable for high-quality LPG hoses. Designed to easily connect two Ø 6 mm hoses . Allows you to separate a hose , thus facilitating...
€4.54
More
In stock
Out-of-Stock CONNECTION GAS VAPO AG GFI RENAULT OCCASION

Reference: RAAG

Brand: AG / GFI / TELEFLEX

(0)
Gas inlet connector on AG GFI vapes from Renault (USED PARTS) only suitable for AG GFI vapes from renault whose assembly is original
€3.17
More
Out-of-Stock
LPG ELBOW/POLYVALVE FITTING Ø6X6 GZ1575A-L49

Reference: GZ1575A-T10

LPG ELBOW/POLYVALVE FITTING Ø6X6 GZ1575A-T10

(0)
LPG elbow fitting for multi-valve, solenoid valve or vaporizer regulator – Ø 6 mmElbow fitting specifically designed for LPG installations.Allows easy connection of copper LPG pipes to multi-valves with a Ø 6 mm outlet.Made to ensure reliable sealing and safe installation.
€4.92
More
(Quantity discount reserved for professionals) see table below
Back to top

Follow us on Facebook

Facebook