Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 10.3-12.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø5 int and Ø11 ext
(Discount by quantity) see table below
The TRUMA burner kit 34020-00932 is a spare part intended for the repair and maintenance of TRUMA Combi 4 and Combi 6 heating systems manufactured from May 2013 onwards.
This kit allows you to replace a burner that has a malfunction, is damaged or worn out, requiring its replacement.
The burner is an essential component of the heating system's combustion process. Its proper functioning helps ensure consistent heat production and correct gas combustion.
A replacement part for your TRUMA heater
Specifically designed for compatible TRUMA combination heaters, this kit allows the combustion system to be repaired without replacing the entire heater, when the diagnosis confirms that the burner is faulty.
TRUMA Combi heaters are widely used in motorhomes, campervans and other recreational vehicles to provide heating for the living area and hot water production.
Technical specifications
Characteristic
Information
Brand
TRUMA
Designation
Burner assembly / burner set
Manufacturer reference
34020-00932
Part type
Replacement burner
Compatibility
TRUMA Combi 4 and Combi 6
Compatible manufacturing date
From 05/2013
Application
Combined gas heating
Use
Burner repair and replacement
Compatibilities
This burner is designed for the following appliances:
TRUMA Combi 4 from May 2013.
TRUMA Combi 6 from May 2013.
Important: Before ordering, please check your TRUMA appliance's model number and manufacturing date. Compatibility with other versions, particularly Combi E, is not confirmed here.
Assembly instructions
Replacing the burner directly affects the combustion circuit of a gas-powered appliance.
For safety reasons, we recommend entrusting this intervention to a qualified professional, capable of verifying the correct assembly, sealing and operation of the heating system after repair.
Why order from AIRGPL?
Distributed in France by AIRGPL, this product is offered to professionals and individuals looking for a reliable and economical solution at an advantageous price.
filter cartridge for the Truma gas filter
When the filter element is saturated (like a sponge soaked up), it can no longer absorb any more oily particles. The oil then flows out of the filter element and drips into the lower part of the filter housing. As soon as you notice an oil film there, you need to replace the filter cartridge.
20×1.5 reducing fitting for CS / Duo Control regulator – TRUMA
This M20×1.5 reducing fitting is specifically designed to replace the rigid outlet of a TRUMA CS or Duo Control regulator. It allows for the direct connection of an 8 mm diameter LPG hose (instead of a rigid pipe), for a more flexible and easier installation.
Flexible hose Ø8 available by...
1 specific reducing connection (16X1.5) to connect the inlet of the CS control regulator from TRUMA this connection replaces and screws in place of the connection for rigid pipe, thus allowing the use of LPG flexible diameter 8 in place of 'a rigid pipe (See photos)
Flexible Ø8 available by clicking here
Adapter connection for CAMPO refillable bottle.
This reducer allows you to adapt the gas outlet from German connections to France...
this reducer has an internal diameter of 20mm and an external diameter of 21mm
The 45cm high-pressure gas hose from Truma is used for the caravan, motorhome or motorhome to connect the LPG bottle to the pressure regulator. Only hoses equipped with a hose burst safetyare suitable for operating the gas appliance while driving. TRUMA gas moving head with rupture protection for motorhomes.
Gas reducing fitting M21.8 LH (left-hand thread) with Ø6 mm nipple for easy connection of a Ø6 flexible hose to a gas cylinder (butane, propane or rechargeable LPG).
GOK Pressure regulator 30mbar 1.5kg/h 10mm incl. manometer
For connection to gas cylinders with a high-pressure hose, for pressure regulation to the nominal pressure of the gas appliance.Including integrated overpressure safety device.CE type test approval according to Equipment Directive
Kit of 4 adapters for LPG refillable bottle for the following countries
1. KLF x AG M 10 x 1 = Switzerland, Italy 2. KLF x IG L 20 x 1/14 LH = Austria, Italy, Greece 3. KLF x AG M 14 x 1.5 = England, Portugal, Norway, Sweden, Finland 4. KLF x IG W 21.8 x 1/14 LH = France, Belgium, Spain, Netherlands, Switzerland, Ireland, Croatia, Luxembourg, Latvia,...
Connection type: Tee W21.8 x 1/14 LH
Filling capacity: Suitable for gas bottles up to 33 kg each
Material: High quality steel, strong and durable
Compatibility: Compatible with various regulators and equipment using a W21.8 x 1/14 LH fitting
Connection for 2 LPG or propane cylinders
Flexible double connection type G2 FARO Ø8 Approved 67r01 (50cm) (60cm with the 2 fittings)
Optimize your gas installation with this FARO high-pressure hose , designed for easy connection of two gas cylinders (LPG or Propane). At 50 cm long, it allows you to simultaneously empty two cylinders via a G2 type...
The high-pressure gas hose from Truma is used for the caravan, motorhome or motorhome to connect the LPG cylinder to the pressure regulator. Only hoses equipped with a hose burst safetyare suitable for operating the gas appliance while driving. TRUMA gas moving head with rupture protection for motorhomes.
GOK Pressure regulator 50mbar 1.5kg/h - bottle nut. For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance. Including built-in overpressure VALVE device.
CE type test approval
Outlet pressure: 50mbar Throughput: 1.5kg per hour Inlet: bottle nut Outlet: G 1/4 g M
90° elbow fitting M20x1.5 for Truma / GOK hose 90° elbow fitting with M20x1.5 thread, specially designed for gas installations equipped with Truma or GOK hoses and regulators. This elbow allows for easy connection of the gas cylinder to the regulator, while optimizing installation in confined spaces. Ideal for mounting on a wall-mounted regulator, on the...
Identify and reset with triggered shock sensor
Indicates the bottle currently in use, and whether it is empty or full
Automatic switchover from empty gas bottle to full gas bottle
Low weight
Quick assembly possible
Available in vertical and horizontal variant
KLF gas adapter to 21.8 LH thread – European compatible adapter for pressure regulators or Certools filter with German connection (KLF) for gas cylinders commonly used on the European market.
