Reference: FL01A24

Brand: AIR GPL

UNIVERSAL FILTER Ø14 FL01A24

(0)
Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01 PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
€17.01 €18.90
More
(Discount by quantity reserved for professionals) See table above

Reference: FPG2512-A25

FILGAZ FILTER FPG25 DACIA RENAULT LPG Ø12 FPG2512-A25

(0)
FILGAZ FPG25 LPG filter Ø12X12 (Discount by quantity reserved for professionals) See table below "Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...  
€17.00
More
In stock

Reference: LR0275FKN208A-13 674072000

Brand: Landirenzo

FILTER DACIA OPEL LI02-IG1 LR0275FKN208-A13

(0)
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident . Discount by quantity reserved for professionals See table below
€5.94
More
In stock
All best sellers
  • Banner

VERROUILLAGE DE LA DISTRIBUTION FORD, PEUGEOT 407 VOLVO 807/607 - 2.0 L -2.2 L
  • VERROUILLAGE DE LA DISTRIBUTION FORD, PEUGEOT 407 VOLVO 807/607 - 2.0 L -2.2 L

TIMING LOCK FORD, PEUGEOT 407 VOLVO 807/607- 2.0L -2.2L

20c01/0062

Timing lock Ford, Peugeot 407 Volvo 807/607- 2.0L -2.2L

€36.57
VAT included
Quantity

Description

– Ford S Max 2.2 (10/08) 2.2 Galaxy (08-10) Mondeo 2.2 2.0 (10/07)
units: QXBA (2.2) QXWA (2.0) QXBB (2.0) Q4BA (2.2) QXWA (2.0) QXWB (2.0) AZBA (2.0) AZBC (2.0), TEA (2.0)

– Peugeot 807 (05-11) 407 (05-11) 607 (05-09)
units: DW10UTED4 (RHK) DW10BTED4 (RHR) DW12BTED4 (4HS) (4HP) (4HT), (4 hours)

-Citroen: C4 (04-10), C5 II (04-10)
engines: DW10BTED4 (RHR)

-LAND Rover Freelander (06-10)
engines: DW12BTED4, 224DT

- Volvo: S40 (03-10), V50 (06-10), C70 (06-10), S80 (07-10), 906-10 C30), V70 (10/07)
Engine: 2.0D D420T

Product Details
20c01/0062
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: 20256243

3/4″ RATCHET

(0)
3/4″ ratchet Total length 500 mm, weight 2350 grams 3/4″ (20 mm) square drive, with quick insertion release made of chrome-vanadium steel, chrome-plated, straight version, with knurling at the end of the handle bolt shank, chrome plated, 24 teeth Tool in execution of the highest quality for long life in daily use in the workshop
€66.58
More
In stock

Reference: 20t63002c

SUPPORT FOR MOUNTING TA – 450 KG

(0)
Bracket for mounting motors – 450 kg Support for working with the engine. It has four movable clamps attached to a plate that rotates 360 degrees. Robust chassis. device with wheels to facilitate the movement of the motor. specifications: Load: 450kg Height: 825mm Base dimensions: 900×700 mm Rotate: 360 degrees Weight: 68kg
€542.68
More
In stock

Reference: 20kb-09039

UNIVERSAL GIMBAL PULLER

(0)
UNIVERSAL GIMBAL PULLER This drive shaft puller is a real professional tool, as it can be used on almost all vehicles with front-wheel drive.
€50.47
More
Last items in stock

Reference: bgs4249

TOOL SET FOR SPLINE (XZN) & TS TA R ALTERNATORS

(0)
TOOL SET FOR SPLINE (XZN) & TS TA R ALTERNATORS Spline Alternator Tool Set (XZN) & TS TA R Tool for repairing and assembling alternators. Application: for dismantling alternators, in particular for holding the central nut on the pulleys. Relevance: Bosch, Valeo. Universally suitable for almost all current automobiles
€50.48
More
In stock

Reference: 20s-abj3

PNEUMATIC JACK 3 BODS - 3 TONNES

(0)
Pneumatic jack 3 cylinders - 3 tons The Pneumatic Cushion Lift, commonly referred to as the SATRA Snowman, has been designed and manufactured to lift vehicles up to 3000 kg. The jack has two control valves, inlet and outlet, which makes control very easy. SEE DESCRIPTION BELOW
€363.42
More
Last items in stock

Reference: 20PM-03 R2

PNEUMATIC JACK 4.5 TONS 3 FLUIDS

(0)
This pneumatic cylinder is powered by compressed air. Pneumatic jack 4.5 tons 3 flanges Maximum pressure 8 bar Weight 23 [kg] Capacity 4.5 [t] Minimum height 125 [mm] Max. height 355 [mm] Stroke 230 [mm] Minimum pressure 7 bar
€686.50
More
In stock

Reference: 201033

OIL FILTER CHAIN WRENCH

(0)
Oil filter chain wrench in 1/2″, 65 – 115 mm Extra heavy constructionSuitable for all car oil filters around 65-115mm in diameter1/2"With extremely tear-resistant chain, 32 links
€54.93
More
Last items in stock

Reference: 20bgs198

MAGNETIC EXTENSION EXTENSIONS 1/4″ – 3/8″ – 1/2″

(0)
Magnetic extensions 1/4″ – 3/8″ – 1/2″ chrome-vanadium steel, chrome-plated One 1/4" (6.3mm) square drive socket wrench, the overall length of 38.6mm A socket wrench with 3/8" (10.0 mm) square drive, total length 43.3 mm One 1/2" (12.5mm) square drive socket wrench, total length 60.8mm each with a strong magnetic fixing screw
€22.42
More
In stock

Reference: 20c01/0081

(0)
Audi 3.0 V6 locking crankshaft (locking pin)
€16.73
More
In stock

Reference: NF BARDAHL

Brand: VLUBE

BARDAHL BRAKE CLEANER AND DEGREASER 600ML

(0)
The BARDAHL cleaner and degreaser with a large capacity of 600ml is very powerful for cleaning and degreasing brakes, clutches (discs, drums, jaws...), but also other mechanisms (engines, clutches... DISCOUNT BY QUANTITY RESERVED FOR PROFESSIONALS (See table below)
€4.04
More
DISCOUNT BY QUANTITY RESERVED FOR PROFESSIONALS (See table below)

Reference: CA0640-N

Brand: AIR GPL

TIGHTENING CABLE 4.8 X 290mm CA 0640-N

(0)
Black plastic clamps, Length 290mm x width 4.8 mm, essential for fixing cables in packs of 100 pieces (Discount by quantity reserved for professionals) see table below
€4.70
More
(Discount by quantity reserved for professionals) see table below

Reference: 20tl-004

50 CM CHROME TIRE LEVERS

(0)
Large 50cm tire lever -1 side in lever beak,-1 beveled sideVery resistant vanadium treated steel.In addition to dismounting the tires, it can be used to lever on a wheel shaft
€24.90
More
In stock

Reference: 20bgs3200

3-18MM TWIST DRILL SHARPENER

(0)
3-18mm twist drill bit sharpener for all 3-18mm diameter twist drill bits before a vertically rotating grinding wheel adjustable grinding angle, including manual Tool for every day use at an optimal price-performance ratio
€40.13
More
In stock

Follow us on Facebook