Home
Brands

  • Banner

  • On sale!
PULLER BALL JOINT AXIAL WITH 3 INTERCHANGEABLE HEADS-4PCS
  • PULLER BALL JOINT AXIAL WITH 3 INTERCHANGEABLE HEADS-4PCS

AXIAL BALL JOINT PULLER WITH 3 INTERCHANGEABLE HEADS-4PCS

20s-b4sr

Used to unlock and lock the axial ball joints at the end of the steering rack.
These rollers grip the axle, to be used with a 27 hex key or a 1/2″ square.

Head sizes:

1st: 30 to 35 mm
2nd: 35 to 40 mm
3rd: 40 to 45 mm

€81.58
Quantity
Last items in stock

Description

Axial ball joint extractor with 3 interchangeable heads-4pcs

Axial ball joint extractor / tie rod remover with 3 interchangeable heads
Allows for quick and easy removal and replacement of the inner tie rod end

Without the need to disassemble the steering rack, the bulkhead

Drive head scope: diameter 30-35mm, 35-40mm, 40-45mm

High quality track rod removal/installation kit.
Hardened and tempered for maximum strength and durability.
Designed to allow quick and easy replacement of the inner steering ball joint without disassembling the steering rack.
Ideal for most makes and models of automotive and light commercial vehicles.
Simple and easy to use with a 1/2" ratchet or 27mm hex wrench to twist the end.
Extra long hollow body to help reach further into the steering arm.
Supplied complete as shown in pictures.
Brand new

Product specifications:

OD head: 89mm
Body length: 400mm
Head application: 30-45mm

Product Details
20s-b4sr
3 Items
16 other products in the same category:
On sale! Out-of-Stock TOOLS FOR TRANSMISSION BELLOWS

Reference: 20a-125

TRANSMISSION BOOT INSTALLER TOOLS
(0)
Gimbal bellows installation, this pneumatic tool, with its 8 articulated arms, makes it possible to spread the bellows and put it in place. Also suitable for all types of VL and light utility driveshafts.
Price €321.25
More
Out-of-Stock
COMPRESSOR shock ABSORBERS HYDRAULIC

Reference: presamort

HYDRAULIC SHOCK ABSORBER COMPRESSOR
(0)
1 ton hydraulic press replace or dismantle the shock absorbers of your car safely Easy to use thanks to the pedal and the hydraulic jack! Change your shock absorbers safely while saving time
Price €277.44
More
Last items in stock
On sale! TOOLS RAISES A BELLOWS OF PNEUMATIC TRANSMISSION

Reference: 20a-125

PNEUMATIC TRANSMISSION BELLOW TOOLS GM 20a-125
(0)
TOOLS for fitting universal joint bellows, this large model pneumatic tool, with its 8 articulated arms, allows the bellows to be moved aside and put in place. Also suitable for all types of VL and light utility driveshafts.
Price €325.11
More
In stock
PULLER WHEEL BEARING VW T5/TRANSPORTER, TOUAREG - Ø 85mm 20bgs8324

Reference: 20a-h185

Brand: AIR GPL

WHEEL BEARING PULLER VW T5/TRANSPORTER, TOUAREG- Ø 85mm 20a-h185
(0)
WHEEL BEARING PULLER VW T5 MULTIVAN AND TRANSPORTER, TOUAREG - Ø 85 MM A special kit for installing and removing bearings – wheel hub with a diameter of 85mm. The use of this kit allows the dismounting of the bearing-hub at an appropriate angle, which is very important to avoid damage to the casing and other elements. Suitable for VW T5 and Touareg with...
Price €147.22
More
Last items in stock
PNEUMATIC JACK 4.5 TONS 3 BULBS

Reference: 20PM-03 R2

PNEUMATIC JACK 4.5 TONS 3 FLUIDS
(0)
This pneumatic cylinder is powered by compressed air. Pneumatic jack 4.5 tons 3 flanges Maximum pressure 8 bar Weight 23 [kg] Capacity 4.5 [t] Minimum height 125 [mm] Max. height 355 [mm] Stroke 230 [mm] Minimum pressure 7 bar
Price €572.08
More
In stock
HYDRAULIC FLOOR JACK ALUMINUM -9 KG -SPECIAL CONVENIENCE STORE

Reference: 20bgs2885

HYDRAULIC ALUMINUM JACK -9 KG - SPECIAL TOWARDS DEVICE
(0)
Hydraulic aluminum jack -9 kg - special repairman – Reduced weight by aluminum construction – min Height: 125 mm – max. Height: 340mm. – Length: 492mm – Width: 230mm – Weight: 9.2 Kg – front wheels: Ø 65 mm – Swivel castors: Ø 40 mm – with practical carrying handle
Price €396.06
More
In stock
JACK LIFTING HYDRO-PNEUMATIC ROLLING CAPACITY 22 TONS

Reference: 20T22050

ROLLING HYDRO-PNEUMATIC LIFTING JACK CAPACITY 22 TONNES
(0)
Hydro-pneumatic rolling jack with a capacity of 22,000 kgs This hydraulic cylinder is ideal for industrial applications. The jack has a lifting capacity of 22 tons and is a perfect helper in your workshop. It has a low underlying height to provide maximum access and easy adjustment. This item is perfectly applicable in garages, workshops and factories.
Price €458.04
More
In stock
JACK, HYDRO-PNEUMATIC 25 AND 50 TONS WITH ACTUATOR, 2-STAGE

Reference: 20T22050

25 AND 50 TON HYDRO-PNEUMATIC JACK WITH 2-STAGE ACTUATOR
(0)
25 and 50 ton hydro-pneumatic jack with two-stage actuator The cylinder is equipped with a two-stage actuator: And the lifting capacity is: – Position I lifting capacity 25T – Position II lifting capacity 50T
Price €1,837.94
More
In stock
SOCKET PIN FOR THE LOWER BALL JOINT CITROEN AND PEUGEOT 51MM

Reference: 20a-lbj51

PIN SOCKET FOR CITROEN AND PEUGEOT LOWER BALL JOINT 51MM
(0)
Its special design with 4 pins allows / installation without damaging other components. driver: 3/4” Size: 19 x 45mm dia. ext. 51mm in diameter. ext. 43.00mm cut. 4 x 4.1 mm studs Application: Citroen BX (82-94) Citroen C5; Xantia Peugeot 305 (82-90); 405 (87-96); 406; 605; 607 ...
Price €15.75
More
In stock
PULLER FOR BALL JOINTS

Reference: 20ah-1257

BALL PULLER
(0)
– To remove the steering rod ball joints Mercedes-Benz W220 W211 W230 lower ball joint extractor – Also suitable for SUVs
Price €29.17
More
In stock
Comments (0)
No customer reviews for the moment.