Reference: 20kb04009
4 IN 1 PULLER FOR REMOVING 4WD, RENAULT MASTER, VW T4 AND UTILI TA IRES BALL JOINTS
Banner
Commonly called Tulip.
The hollow body allows the guide bar to pass until the axial joint touches the head part of the tool
Choose a 27mm wrench or 1/2" socket to work the end of this tool, turn it counter-clockwise to loosen the axial joint
Rack ball joint extractor 35/45mm-
commonly called “tulip”
The axial ball joint extractor is a tool made up of a long tube allowing the tie rod to be inserted therein to access the axial ball joint. Its end has a hexagonal recess for the location of a tightening sleeve.
The other end of the tool includes the circular casing of the ball joint and allows, thanks to a locking system, its screwing or unscrewing.
Thanks to its concentric roller jaws, it can grip any rod end measuring 35-45mm.
It covers most car models.
Bar can be driven by ½” or 27mm ratchet
Tool to remove or install tie rods with axles from 35 mm to 45 mm
To unlock or lock the axial ball joints at the end of the steering rack
The long axle helps to protect the bodywork from damage caused by the key. It hooks the inner ends of the rods which have incomplete or inaccessible flat ends or which do not have any.
Reference: 20kb04009
4 IN 1 PULLER FOR REMOVING 4WD, RENAULT MASTER, VW T4 AND UTILI TA IRES BALL JOINTS
Reference: 20t31513
VERY LOW PROFILE HYDRAULIC JACK - 3T DOUBLE PISTON
Reference: 20T22050
25 AND 50 TON HYDRO-PNEUMATIC JACK WITH 2-STAGE ACTUATOR
Reference: 20a-lbj51
PIN SOCKET FOR CITROEN AND PEUGEOT LOWER BALL JOINT 51MM
Reference: 20a-711
STEERING BALL JOINT SPRING SPREADER TOOL
Reference: 20t60260
2-STAGE JACK AND PUMP AND PEDAL RELEASE 1 TON
Reference: 20lbj51-lbj60
2-PIECE SET FOR EXTRACTING PEUGEOT CITROEN LOWER BALL JOINTS
Reference: 20a-125
TRANSMISSION BOOT INSTALLER TOOLS
Reference: 20kb-04028
MIXED BALL PULLER/PULLER 16 TO 27 MM BY HAND OR PNEUMATIC
Reference: 20a-125
PNEUMATIC TRANSMISSION BELLOW TOOLS GM 20a-125
Reference: 20s-abj3
PNEUMATIC JACK 3 BODS - 3 TONNES
Reference: 20a-p115
PNEUMATIC TRANSMISSION BELLOW TOOLS 20 a-p115
Reference: 20kb-04006
INERTIA PULLER HUB, BEARING, PULLEY
Reference: 2066535
25 – 55 MM SPHERICAL HEAD LINKAGE REMOVAL (OR AXIAL BALL)
Reference: 20kb03202
DISASSEMBLING THE 27 – TA AXIAL STEERING BALL JOINT
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent