Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 10.3-12.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø5 int and Ø11 ext
(Discount by quantity) see table below
This QNEXT GNV-GNC kit from AC STAG allows perfect operation in GNV of indirect injection engines. Supplied with hoses, Tomasetto A112 CNG vapodétendeur, excellent quality AC W02 injectors, fittings, Led 600 switch, gas level sensor, assembly diagram.
The STAG Q-generation is a group of modern STAG controllers for auto gas (QBOX, QNEXT, QMAX), developed by the most experienced manufacturers of the STAG brand.
STAG Q-Generation Controllers
STAG Q-generation controllers are controllers with advanced technology and extensive functionality, allowing to perfectly adjust the automotive gas installation in all types of multi-point indirect injection engines.
Auto Gas Controller
Engine type: indirect fuel injection Maximum number of cylinders: 4 Fuel type: LPG and CNG gas Controller warranty period: 5 years Approval E8 67R-01 4903, E8 10R-03 6616, E8 110R-00 4904 REF.: WEG-AMA025419999-300
Description
Modern, good quality automotive gas controllers designed for cars with four-cylinder engines with indirect gasoline injection. The controller box has two installation options: angular (STAG QBOX PLUS), straight (STAG QNEXT PLUS). This gives the installer the opportunity to mount the device, adapting it to the structure of the engine compartment.
Characteristic
Advantage
Access to vehicle data (OBD)
Ability to enable self-adaptation in the controller
Access to vehicle data (OBD)
No need for external OBD scanner
Compatibility with mobile applications
Viewing controller operating parameters on your smartphone
STABILITY
Stable operation in all conditions
Dedicated to the automotive sector
Processor designed for use in a car only
Features
OBD self-adaptation
ISA 3 self-adaptation designed by us
Supports CAN and K-LINE interfaces compatible with OBD2/EOBD
Brass cap with O-ring Ø10 x1 Height 19mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass plug Ø8 pitch 100 Height 6mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass cap with O-ring Ø13 x 1.25 / thread height 8mmThis plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Dual OBD2 socket extension (30cm)This OBD II cable is used to extend the OBD2 socket of your vehicle when the latter is located in an inaccessible place (for example as in the Dacia Sandéro)Very useful cable when setting up LPG kitsHigh quality, flexible and durable cable, compatible with a 16-pin plug.
SEE SHEET BELOW
Brass cap with O-ring Ø14 x 1.25 / thread height 8mmThis plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
OBD2 plug extender (30cm)This OBD II cable is used to extend the OBD2 socket of your vehicle when the latter is located in an inaccessible place (for example as in the Dacia Sandéro)Very useful cable when setting up LPG kitsHigh quality, flexible and durable cable, compatible with a 16-pin plug.
SEE SHEET BELOW
Brass cap with O-ring Ø16 x 1.25 / thread height 8mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Blank LPG transformer plate, per unit Contact us for a larger request
Length 160mm x 30mm x 1mm
Contact us for a larger request
(We offer you the cost of model 35€)
This product exclusively reserved for LPG installers
Brass cap with O-ring Ø06 x1 Height 10mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass cap with O-ring Ø12 x1.25 Height 10mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Connector for tubing and extending LPG or CNG injectors with Ø6 copper pipes. This type of kit allows better gas injection on certain engines. Sold with the shaped copper tube
KIT AC STAG QBOX PLUS 4 CYL
This GNV-GNC QBOX kit from AC STAG allows perfect operation in GNV of indirect injection engines.Supplied with hoses, Tomasetto A112 CNG vapodétendeur, excellent quality AC W02 injectors, fittings, Led 600 switch, gas level sensor, assembly diagram.
The difference between Qbox and Qnext calculator is in the connector location...
This QNEXT GNV-GNC kit from AC STAG allows perfect operation in GNV of indirect injection engines. Supplied with hoses, Tomasetto A112 CNG vapodétendeur, excellent quality AC W02 injectors, fittings, Led 600 switch, gas level sensor, assembly diagram.
