Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Adapter for filling 13Kg gas bottles. Cup for France, Italy, Portugal. Possibility of adding another adapter for other countries
Filling of gas cylinders prohibited in France and ItalyAdapter sold without seal! (sealing is metal to metal)
On PROMO secure camper van bottle follow the link SECURE GAS BOTTLE
DIRECT ACCESS A DEMONSTRATION OF LPG BOTTLE FILLING
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
This Q MAX kit allows the perfect operation in LPG of indirect injection engines. Supplied with hoses, MAGIC LPG vaporizer, AC W02-W31 injectors, fittings, Led 600 switch assembly diagram.
The Q-generation STAG is a group of modern STAG throttle controllers (QBOX, QNEXT, QMAX), developed by the most experienced builders of the STAG brand.
Q-generation STAG controllers
Q-generation STAG controllers are controllers with advanced technology and extensive functionality, allowing perfect adjustment of the automotive gas installation in all types of multipoint indirect injection engines.
auto gas controller
Engine type: indirect fuel injection Maximum number of cylinders: 8 Fuel type: LPG and CNG gas Controller warranty period: 5 years Standards and approvals E8 67R-01 4289, E8 10R-03 6615, E8 110R-00 4534
REF. STAG 300-6 QMAX PLUS: WEG-AMA027609999-300
REF. STAG 300-8 QMAX PLUS: WEG-AMA027609999-300
Description
The STAG QMAX PLUS is the successor of the STAG QBOX PLUS controller, created especially for 1 and 8 cylinder engines with indirect fuel injection. It is characterized by its advanced technology, which distinguishes itself from the range of Q-generation controllers, and by a complete suite of integrated features.
Characteristic
Advantage
Connection to OBD
Possibility to activate self-adaptation
Connection to OBD
External OBD scanner unnecessary
Connection to OBD
Viewing controller operating parameters on your smartphone
Features
OBD self-adaption
ISA3 automatic adaptation designed by us
Support CAN and K-LINE interfaces compatible with OBD2/EOBD
Expanded option of OBD reader module with erasing
automatic errors
Nesting of fuels at the time of switching
FLE-FC and LE-JC fuel level emulators
FPE-A Fuel Pressure Emulator
Full support for 2 banks
Straight connection: 90 pins
Bluetooth-enabled
Compatible with a parameter logger
Mobile app support
Composition of the set recommended by the manufacturer
LPG STAG R01 TYPE 150, STAG R01 TYPE 250, STAG R02, STAG R02 TWIN, STAG R02 EL CNG STAG R14
LPG and CNG STAG AC W01, STAG AC W01 BFC, STAG AC W02, STAG AC W02 BFC, STAG AC W03, STAG AC W03 BFC, STAG ACW-012
90° Elbow Connector with Ø6 Polyamide Pipe – Special LPG Admission
Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting!
This 90° elbow fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the...
Straight fitting Ø 6 mm – Special for LPG injection / intake manifold Give your engine a high-performance and easy-to-install solution for your LPG injection system. ✅ Technical specifications Ø 6 mm inlet and outlet nozzles suitable for high-quality LPG hoses. Designed to easily connect two Ø 6 mm hoses . Allows you to separate a hose , thus facilitating...
Straight connector – Special LPG admission Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting! This straight fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the performance of your LPG...
Brass cap with O-ring Ø10 x1 Height 19mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass cap with O-ring Ø06 x1 Height 10mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
An accessory for the LED 600 petrol/gas switch.The 600 LED Ring is a visually appealing finish to our most popular b/g switch.Two color versions - gold and silver, allow you to customize the look of the switch to your taste
Brass cap with O-ring Ø13 x 1.25 / thread height 8mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass cap with O-ring Ø16 x 1.25 / thread height 8mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass cap with O-ring Ø12 x1.25 Height 10mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
90° Elbow Connector with Ø6 Polyamide Pipe – Special LPG Admission
Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting!
This 90° elbow fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the...
Brass plug Ø8 pitch 100 Height 6mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
POLYAMIDE TUBE Ø EXT 6mm Ø inter 3.2mm useful for tubing and extending LPG or CNG injectors Great ease of installation
Tube sold by the meter (example 3 meters purchased you / receive a length of 3 meters)
Brass cap with O-ring Ø14 x 1.25 / thread height 8mmThis plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
AC STAG QMAX PLUS 5-CYLINDER KIT
This Q MAX kit allows the perfect operation in LPG of indirect injection engines.Supplied with hoses, vapo R01 OR MAGIC AC W02 injectors, fittings, Led 600 switch assembly diagram.
SEE DESCRIPTION BELOW
Dual OBD2 socket extension (30cm)This OBD II cable is used to extend the OBD2 socket of your vehicle when the latter is located in an inaccessible place (for example as in the Dacia Sandéro)Very useful cable when setting up LPG kitsHigh quality, flexible and durable cable, compatible with a 16-pin plug.
SEE SHEET BELOW
AC STAG LED-500 Petrol/Gas Switch:
Compatible with AC STAG PLUS Q generation LPG systems and DPI or DIESEL controllers, i.e. QBOX PLUS, NEXT PLUS, QMAX PLUS, STAG -400 DPI, STAG -DIESEL,
This Q MAX kit allows the perfect operation in LPG of indirect injection engines. Supplied with hoses, MAGIC LPG vaporizer, AC W02-W31 injectors, fittings, Led 600 switch assembly diagram.
