Universal gaseous LPG filter for LPG pipes Ø 14mm intended for the protection of LPG injectors adaptable to a large number of LPG systems Approved 67 r 01
PROMOTIONAL RATE BY QUANTITY RESERVED FOR PROFESSIONALS
FILGAZ FPG25 LPG filter Ø12X12
(Discount by quantity reserved for professionals) See table below
"Low pressure" gas phase filter used on the original assemblies of Dacia and Renault vehicles. The inlet and outlet diameters are 12 or 14 mm. Originally installed in the DACIA range: Sandero, Duster... Renault: Captur, Clio 5...
OETIKER EAR COLLAR 16.6-19.8mm stainless steel manufacturing,
ideal for tightening hoses for LPG injectors Ø12 INT and Ø18 EXT
(Discount by quantity) see table below
Liquid filter for Landi Renzo LI02 or IG1 solenoid valve (with seal) located on the Dacia Sandéro, Renault Clio, Opel corsa Mériva Agila vapo
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident .
Discount by quantity reserved for professionals See table below
OETIKER EAR COLLAR 22.4-25.6mm stainless steel construction,
ideal for tightening hoses for LPG injectors Ø16 INT and Ø24 EXT
(Discount by quantity) see table below
The Q-generation STAG is a group of modern STAG throttle controllers (QBOX, QNEXT, QMAX), developed by the most experienced builders of the STAG brand.
Q-generation STAG controllers
Q-generation STAG controllers are controllers with advanced technology and extensive functionality, allowing perfect adjustment of the automotive gas installation in all types of multipoint indirect injection engines.
auto gas controller
Engine type: indirect fuel injection Maximum number of cylinders: 4 Fuel type: LPG and CNG gas Controller warranty period: 5 years Approval E8 67R-01 4903, E8 10R-03 6616, E8 110R-00 4904 REF.: WEG-AMA025419999-300
Description
Good quality modern automotive gas controllers designed for cars with four-cylinder engines with indirect gasoline injection. The controller box has two installation options: angled ( STAG QBOX PLUS), straight ( STAG QNEXT PLUS). This gives the installer the possibility to mount the device adapting it to the structure of the engine compartment.
Characteristic
Advantage
Access to vehicle data (OBD)
Possibility to activate self-adaptation in the controller
Access to vehicle data (OBD)
No need external OBD scanner
Mobile app compatibility
Viewing controller operating parameters on your smartphone
STABILITY
Stable operation in all conditions
Dedicated to the automotive sector
Processor designed only for use in a car
Features
OBD self-adaption
Self-adapting ISA 3 designed by us
Support CAN and K-LINE interfaces compatible with OBD2/EOBD
An accessory for the LED 600 petrol/gas switch.The 600 LED Ring is a visually appealing finish to our most popular b/g switch.Two color versions - gold and silver, allow you to customize the look of the switch to your taste
Straight connector – Special LPG admission
Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting!
This straight fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the performance of your LPG...
Brass cap with O-ring Ø14 x 1.25 / thread height 8mmThis plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Straight connector with Ø6 Polyamide pipe – Special LPG admission
Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting!
This straight fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the...
Blank LPG transformer plate, per unit Contact us for a larger request
Length 160mm x 30mm x 1mm
Contact us for a larger request
(We offer you the cost of model 35€)
This product exclusively reserved for LPG installers
90° Elbow Connector with Ø6 Polyamide Pipe – Special LPG Admission
Give your engine the best of LPG injection with this high-performance, easy-to-install elbow fitting!
This 90° elbow fitting is specially designed for piping on intake manifolds equipped with long tubes. It allows for better gas diffusion, closer to the intake valves, thus optimizing the...
OBD2 plug extender (30cm)This OBD II cable is used to extend the OBD2 socket of your vehicle when the latter is located in an inaccessible place (for example as in the Dacia Sandéro)Very useful cable when setting up LPG kitsHigh quality, flexible and durable cable, compatible with a 16-pin plug.
SEE SHEET BELOW
Brass cap with O-ring Ø16 x 1.25 / thread height 8mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Blank LPG transformer plate with RTI "LPG REMOVAL" pattern sold individuallyMANDATORY SINCE 2017 VERSION 1.112017Contact us for a larger requestLength 160mm x 30mm x 1mmThis product exclusively reserved for LPG installers
Dual OBD2 socket extension (30cm)This OBD II cable is used to extend the OBD2 socket of your vehicle when the latter is located in an inaccessible place (for example as in the Dacia Sandéro)Very useful cable when setting up LPG kitsHigh quality, flexible and durable cable, compatible with a 16-pin plug.
SEE SHEET BELOW
Connector for tubing and extending LPG or CNG injectors with Ø6 copper pipes. This type of kit allows better gas injection on certain engines. Sold with the shaped copper tube
Brass cap with O-ring Ø10 x1 Height 19mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
POLYAMIDE TUBE Ø EXT 6mm Ø inter 3.2mm useful for tubing and extending LPG or CNG injectors Great ease of installation
Tube sold by the meter (example 3 meters purchased you / receive a length of 3 meters)
Brass cap with O-ring Ø06 x1 Height 10mm
This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold.
These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Brass plug Ø8 pitch 100 Height 6mm This plug is very useful to permanently block the holes or the old nozzles located in the intake manifold. These plugs are often used when replacing the obsolete LPG kit with a kit from another brand.
Three-wire electronic petrol/gas switch, which performs several functions, from selection and optical/acoustic signaling of the operating mode to indication of the gas levelsuitable for Qbox, Qnext, Qmax systems
