Home
Brands

  • Banner

  • On sale!
DEVICE FOR The ALIGNMENT OF The CLUTCH
  • DEVICE FOR The ALIGNMENT OF The CLUTCH

CENTER FOR CLUTCH ALIGNMENT

20asta-a-2110a

Tool specially designed for centering the clutch disc on vehicles without pilot bearing;
Model appreciated by the simplicity of its implementation and by the wide range of vehicles on which it can be adapted.
The centering device is delivered with 3 tips, you must take the one that best corresponds to the diameter of the disc, it must be able to pass completely through the hole.

€36.90
Quantity

Description

Description

Centering device for clutch alignment.
Tool specially designed for centering the clutch disc on vehicles without pilot bearing;

– quick to install and remove;

– Dimensions of the bits from 14 mm to 28 mm, thanks to the 3 bits provided;

– not suitable for vehicles with double clutch;

– also designed for vehicles without guide bearing;

– total length 130mm, including 2 sleeves fitting on the conical clamping rod:

1 sleeve from 14 to 21mm in diameter.
and another 21 to 28mm in diameter.

Model appreciated for the simplicity of its implementation and the wide range of vehicles on which it can be adapted

Product Details
20asta-a-2110a
0
4 Items
16 other products in the same category:
JACK, HYDRO-PNEUMATIC 25 AND 50 TONS WITH ACTUATOR, 2-STAGE

Reference: 20T22050

25 AND 50 TON HYDRO-PNEUMATIC JACK WITH 2-STAGE ACTUATOR
(0)
25 and 50 ton hydro-pneumatic jack with two-stage actuator The cylinder is equipped with a two-stage actuator: And the lifting capacity is: – Position I lifting capacity 25T – Position II lifting capacity 50T
Price €1,837.94
More
In stock
KEY FOR THE PULLEY WITH CLIPS INTERCHANGEABLE

Reference: 20a-486

WRENCH FOR PULLEYS WITH INTERCHANGEABLE CLIPS
(0)
Understand: • 2 tips ø 2.5 to 4 ø (mm) • 2 tips ø 3-5 ø (mm) • 2 tips ø 6-8 ø (mm) • 2 tips ø 7-9 ø (mm) • Legend of pulleys 245 mm in length, spacing: 20 – 100 (mm)
Price €99.08
More
Last items in stock
CLEANER MECHANICAL PARTS 80L WITH WASHABLE FILTER - 230V

Reference: t06220

80L MECHANICAL PARTS CLEANER WITH WASHABLE FILTER - 230V
(0)
Mechanical parts cleaner 80L with washable filter - 230v Mechanical parts cleaner 80L with washable filter - 230v Washing fountain This practical and economical cleaning fountain makes it possible to clean and degrease mechanical parts or any other parts requiring cleaning. This 80 liter washing fountain is space-saving, it allows work in complete ergonomics
Price €182.42
More
Last items in stock
On sale! RING SHEATH Ø23 mm ST8183

Reference: 200-5

Brand: AIR GPL

EXTRA LONG DRILL BIT 200mm X Ø5 mm
(0)
DRILL BIT Ø 5mm FOR TA LPG SYSTEM There are 8 kinds of diameters, 4 4.2 4.5 5 5.2 6 8 10mm, High quality material, HSS 4241 high speed steel, total length 200mm Precise positioning, fast cutting, strong chip removal, good wear resistance, Suitable for spring steel, white steel, carbon steel, angle iron, aluminum, copper, wood and stainless steel
Price €4.70
More
(Discount by quantity) see table below
EXTRACTOR, SCREW, STUD,BOLT, MA10556-A

Reference: MA10556-A

SCREW, STUD,BOLT EXTRACTOR, MA10556-A
(0)
SCREW, STUD, BOLT EXTRACTOR Unscrewing damaged rods and studs stud, screw or bolt extractor 6 pullers for 3/8 ratchet Ø extraction heads from 2 to 10 mm Particularly suitable for extracting screws with internal recess, Torx, star, hexagon screws, BTR, Allen... MA10556-A
Price €84.74
More
In stock
On sale! TRAY MAGNETIC HANDMAID WORKSHOP

Reference: 20a-mtb

MAGNETIC CONTAINER FOR WORKSHOP ROLLERS
(0)
Magnetic workshop tray (for example on the roller cabinet side) ideal for temporary storage of small equipment during rapid interventions. 6 strong magnets with protection, capacity approx. 4kgs, 10 holes in lower position Ø 19 mm Dimensions: 210 x 75 x 70 mm
Price €25.20
More
Last items in stock
On sale! LOCTITE 542 FOR LPG / CNG...

Reference: LO542-H15

Brand: AIR GPL

LOCTITE 542 FOR LPG / CNG CONNECTION LO542-H15
(0)
LOCTITE 542 sealing product (red) ideal and essential for sealing all LPG & CNG hydraulic connections FOR STABILITY REASONS, PLEASE NOTE THAT ALL LOCTITE PRODUCTS ARE NEVER COMPLETELY FILLED
Price €29.17
More
WAITING FOR RE-SUPPLY
- €35.00 On sale! Reduced price AUTEL SUITCASE MX 808 LPG / CNG

Reference: MX808GPL

Brand: AUTEL

AUTEL MX 808 LPG / CNG
(0)
This "LPG Option" MX808 case from AUTEL is extremely efficient and also capable of diagnosing the original computers of LPG vehicles, this one uses the manufacturer's diagnostic software (DIAGBOX / CLIP / ISTA / VAS / ODIS / NISSAN CONSULT etc... 2 YEAR WARRANTY + 1 year free update WE ARE AUTEL OFFICIAL RESELLER MORE INFO BELOW
Price €375.00 Regular price €410.00
More
Last items in stock
PNEUMATIC JACK 4.5 TONS 3 BULBS

Reference: 20PM-03 R2

PNEUMATIC JACK 4.5 TONS 3 FLUIDS
(0)
This pneumatic cylinder is powered by compressed air. Pneumatic jack 4.5 tons 3 flanges Maximum pressure 8 bar Weight 23 [kg] Capacity 4.5 [t] Minimum height 125 [mm] Max. height 355 [mm] Stroke 230 [mm] Minimum pressure 7 bar
Price €572.08
More
In stock
THREAD FOR THREAD OF the LAMBDA PROBE, M18 X 1.5

Reference: 20ts-633567

TORQUE WRENCH WHEEL TIGHTENING
(0)
TORQUE WRENCH 1/2 28-210 NM WITH EXTENSION 3/8″ BIT LIFETIME WARRANTY Torque wrench 1/2″ 28-210 Nm with extension + 3/8″ bit Tightening a screw or nut requires the use of a wrench. Often, it is the operator who assesses the degree of tightness by measuring the effort. In some cases, this force must be measured by a special tool: the torque wrench.
Price €57.40
More
Last items in stock
Comments (0)
No customer reviews for the moment.