PRODUCT DESCRIPTION AT13 XP VERSION Product type LPG sequential reducer Product type Die-cast aluminum body Weight 1.70 kg Dimensions 165x120x150 mm Maximum inlet pressure 3 MPa (30 bar) Outlet pressure * from 90 to 180 kPa * Coil voltage 12 V DC Coil power 17 W Fast-on coil connection (AMP on request) Input connection Tube M12x1 Ø 8 mm Output connection Fixed coupling Ø 12.5 mm Motor power up to 275 kW
Reducer for high performance sequential injection systems
ADDITIONAL POWER – TA TA – ADDITIONAL TAThe AT13 XP LPG reducer model is the new version of the AT13 family, designed for higher power engines reaching 275 kW in cold weather. The new AT13 XP has been designed with the dynamic pressure compensation system (like Nordic XP): the special double membrane system allows the LPG outlet pressure to be increased while increasing the engine load. Thanks to a special additional plate and the redesign of the water and gas circuits, this model has the highest heat exchange and gas flow in our range of LPG reducers. The reducer has a double gas outlet, allowing direct connections of 2 injectors. This feature reduces the pressure drops on the circuit, which makes it suitable for higher power motors. AT13 XP is equipped with an internal safety valve overpressure relief system via a MAP connection, so there is no need to connect an additional hose.
Brass fitting Ø 5x14x16 ideal for connecting 2 pipes of diameter 16 with a pipe Ø14 and Ø5/6 for coupling with a gas pressure sensor (Discount by quantity reserved for professionals) see table below
Reducer LPG connector outer Ø 12 x inner diameter 10 ( M12 x F 10) Allows a Ø12 inlet to be reduced by a 10 inlet (copper Ø 6)
(Discount by quantity reserved for professionals) see table below
Vapo regulator Tomasetto RG TA 3520 / 200hp/ 150KW Vapo Regulator, ideal for replacing certain vapo no longer manufactured, efficient and easily housed. aspirated assembly. Ø6 copper inlet that can be increased to Ø8 outlet
Beaten glued reducer LPG fitting for Ø6 pipe of Ø10 external thread used on tomasetto vapes for replacement of Necam Koltec vapes
(Discount by quantity reserved for professionals) see table below
Tomasetto RGTA 3500 100HP/ 75KW Regulator Spray
AT07 100HP Vapo Regulator, ideal for replacing certain vapo no longer manufactured, efficient and easily housed.
Ideal as a replacement for the Vialle regulator vapes mounted on the Renault Clio, Twingo, Kangoo, aspirated assembly Ø6 inlet
Liquid filter for AC system STAG, ATIKER, ALEX , ZENIT , EUROPEGAS , TOMASETTO RGTA 2070 (without seal) for LPG LPG vape regulator AT07-AT09-ALASKA-ARTIC-ANTARTIC-AT13- ALEX SHARP1200-1500-ATIKER SR04
Attention ! It is mandatory to have this LPG part fitted by an auto professional.Our company disclaims all liability in the event of an accident.
Filter...
TOMASETTO liquid filter (with seal) for LPG LPG AT09 regulator vape
Attention ! it is mandatory to have this LPG part fitted by a car professionalOur company disclaims all liability in the event of an accident
(Discount by quantity reserved for professionals) See table below
Vapo regulator Tomasetto 3510 AT07 140HP Vapo Regulator, ideal for replacing certain vaporizers that are no longer manufactured, efficient and easily housed. Ideal to replace the Vialle regulator vaporizers mounted on the Renault Clio, Twingo, Kangoo, aspirated assembly. Ø6 copper inlet
