Home
Brands

  • Banner

PULLER FOR BALL JOINTS
  • PULLER FOR BALL JOINTS
  • PULLER FOR BALL JOINTS

BALL PULLER

20ah-1257

– To remove the steering rod ball joints Mercedes-Benz W220 W211 W230 lower ball joint extractor
– Also suitable for SUVs

€29.17
Quantity

Description

Ball joint extractor
Ball joint separator
This heavy-duty ball joint separator quickly separates the ends of the link rods and the ball joints of the suspension components. The professional way to separate ball joints and tie rod ends without damaging rubber boots. No need for excessive hammering. Center point on force screw pivots to aid in removal and prevent tie rod stud damage. For use on imports and front wheel drive vehicles including SUV's with rack and pinion steering. Heat treated forged steel body and thrust bolt.

Features:

Professional Quality
Forged steel construction
Jaw width: 24mm
Pull stroke: 55mm

Product Details
20ah-1257
4 Items
16 other products in the same category:
COMPRESSOR shock ABSORBERS HYDRAULIC

Reference: presamort

HYDRAULIC SHOCK ABSORBER COMPRESSOR
(0)
1 ton hydraulic press replace or dismantle the shock absorbers of your car safely Easy to use thanks to the pedal and the hydraulic jack! Change your shock absorbers safely while saving time
Price €277.44
More
Last items in stock
TOOL GAUGE OF the SPRING TO THE STEERING knuckle

Reference: 20a-711

STEERING BALL JOINT SPRING SPREADER TOOL
(0)
Tie Rod End Spring Spreader Tool Perfect for removing the spring and shock rod from the steering knuckle. No damage to aluminum or cast iron steering hubs.
Price €49.92
More
In stock
JACK, HYDRO-PNEUMATIC 25 AND 50 TONS WITH ACTUATOR, 2-STAGE

Reference: 20T22050

25 AND 50 TON HYDRO-PNEUMATIC JACK WITH 2-STAGE ACTUATOR
(0)
25 and 50 ton hydro-pneumatic jack with two-stage actuator The cylinder is equipped with a two-stage actuator: And the lifting capacity is: – Position I lifting capacity 25T – Position II lifting capacity 50T
Price €1,837.94
More
In stock
On sale! TOOLS RAISES A BELLOWS OF PNEUMATIC TRANSMISSION

Reference: 20a-p115

PNEUMATIC TRANSMISSION BELLOW TOOLS 20 a-p115
(0)
Gimbal bellows installation, this pneumatic tool, with its 8 articulated arms, makes it possible to spread the bellows and put it in place. Also suitable for all types of VL and light utility driveshafts.
Price €302.76
More
Last items in stock
On sale! TOOLS RAISES A BELLOWS OF PNEUMATIC TRANSMISSION

Reference: 20a-125

PNEUMATIC TRANSMISSION BELLOW TOOLS GM 20a-125
(0)
TOOLS for fitting universal joint bellows, this large model pneumatic tool, with its 8 articulated arms, allows the bellows to be moved aside and put in place. Also suitable for all types of VL and light utility driveshafts.
Price €325.11
More
In stock
HYDRAULIC FLOOR JACK ALUMINUM -9 KG -SPECIAL CONVENIENCE STORE

Reference: 20bgs2885

HYDRAULIC ALUMINUM JACK -9 KG - SPECIAL TOWARDS DEVICE
(0)
Hydraulic aluminum jack -9 kg - special repairman – Reduced weight by aluminum construction – min Height: 125 mm – max. Height: 340mm. – Length: 492mm – Width: 230mm – Weight: 9.2 Kg – front wheels: Ø 65 mm – Swivel castors: Ø 40 mm – with practical carrying handle
Price €396.06
More
In stock
EXTRACTORS JOINT FOR FRONT AXLE, TIE RODS, BALL JOINTS, ETC

Reference: 20kb-04340

MIXED PULLERS FOR FRONT AXLE, TIE-RODS, JOINTS, ETC
(0)
BALL JOINT EXTRACTOR, STEERING LINKS, TIE RODS...and mainly for all front axles. Suitable for working on ball joints, tie rods, ball joints, steering ball joints, steering arms, tie rods, ball bearings, etc.
Price €78.38
More
In stock
GUN GREASE CARTRIDGE PG85

Reference: PG85

PG85 GREASE CARTRIDGE GUN
(0)
GREASE CARTRIDGE GUN Can only be used with 85 gram L145MM GREASE cartridges
Price €33.54
More
Last items in stock
SOCKET PIN FOR THE LOWER BALL JOINT CITROEN AND PEUGEOT 51MM

Reference: 20a-lbj51

PIN SOCKET FOR CITROEN AND PEUGEOT LOWER BALL JOINT 51MM
(0)
Its special design with 4 pins allows / installation without damaging other components. driver: 3/4” Size: 19 x 45mm dia. ext. 51mm in diameter. ext. 43.00mm cut. 4 x 4.1 mm studs Application: Citroen BX (82-94) Citroen C5; Xantia Peugeot 305 (82-90); 405 (87-96); 406; 605; 607 ...
Price €15.75
More
In stock
JACK LIFTING HYDRO-PNEUMATIC ROLLING CAPACITY 22 TONS

Reference: 20T22050

ROLLING HYDRO-PNEUMATIC LIFTING JACK CAPACITY 22 TONNES
(0)
Hydro-pneumatic rolling jack with a capacity of 22,000 kgs This hydraulic cylinder is ideal for industrial applications. The jack has a lifting capacity of 22 tons and is a perfect helper in your workshop. It has a low underlying height to provide maximum access and easy adjustment. This item is perfectly applicable in garages, workshops and factories.
Price €458.04
More
In stock
On sale! Out-of-Stock TOOLS FOR TRANSMISSION BELLOWS

Reference: 20a-125

TRANSMISSION BOOT INSTALLER TOOLS
(0)
Gimbal bellows installation, this pneumatic tool, with its 8 articulated arms, makes it possible to spread the bellows and put it in place. Also suitable for all types of VL and light utility driveshafts.
Price €321.25
More
Out-of-Stock
A CYLINDER HAS 2 FLOORS AND PUMP AND RELEASE PEDAL 1 TON

Reference: 20t60260

2-STAGE JACK AND PUMP AND PEDAL RELEASE 1 TON
(0)
2-STAGE JACK AND PUMP AND PEDAL RELEASE Two-stage 1-ton transmission jack with pump and pedal release This two-stage transmission jack makes it easier to handle and position transmissions on passenger cars and light trucks
Price €678.36
More
In stock
PNEUMATIC JACK 4.5 TONS 3 BULBS

Reference: 20PM-03 R2

PNEUMATIC JACK 4.5 TONS 3 FLUIDS
(0)
This pneumatic cylinder is powered by compressed air. Pneumatic jack 4.5 tons 3 flanges Maximum pressure 8 bar Weight 23 [kg] Capacity 4.5 [t] Minimum height 125 [mm] Max. height 355 [mm] Stroke 230 [mm] Minimum pressure 7 bar
Price €572.08
More
In stock
Comments (0)
No customer reviews for the moment.