Banner
Emulator is used on some Jaguar. This emulator has been designed to maintain a constant voltage of the fuel pressure sensor on Jaguar thus avoiding the ignition of the engine fault warning light. the emulator works only when the engine is on LPG It is necessary to install AEB J when the vehicle is equipped with a sensor at the end of the injection rail note below
NB: If it is necessary to install the emulator on a car which has a pressure sensor (located at the end of the petrol injection rail) different from that shown in the diagram, follow the procedure below:
1) Using a digital multimeter, check voltage on all 3 wires of fuel pressure sensor with engine running and CONNECTOR INSERTED.
2) The wire to which the green wire of the emulator will be connected will have a voltage between 2 and 3.5 Volts which varies according to the fuel pressure; as you accelerate, you will notice the variation in this tension. The other 2 wires from the fuel pressure sensor will have a voltage of 5 and 0 Volt (Ground) respectively. The emulator can only be applied to the cars listed in the list below.
Recommended cars for installation Jaguar X-Type 2.5i V6 24v Multipoint '02 - XB (OBD). Jaguar X-Type 3.0i V6
Reference: PR1550-ME37
Brand: PRINS
WATER TEMP PROBE FOR PRINS VSI PR1550-ME37 VAPOR
Brand: BRC
BRC MAP SENSOR / P1 FLYING INJECTIONReference: DE802039-1-M36
Brand: BRC
GAS TEMP PROBE GENIUS SEQUENT BRC DE802039-1-M36Reference: CA5285
LPG pressure sensor AG Sagem GFI AG5285
Reference: F 091/71006-EM03526e36
Brand: PRINS
PRINS EMULATOR 3 to 6 CYL EM0352-E36Reference: BR0488-E27
Brand: BRC
BRC LPG PRESSURE SENSOR BR0488-E27Reference: DE802041- BR0384
Brand: BRC
LPG SENSOR BRC BOARD/ P1TURBO BR0384Reference: AEB2263-E35
AEB GAUGE SIMULATOR / ALFA ROMEO AEB2263-E35
Reference: F 091/71006-EM0352B-E36B
Brand: PRINS
PRINS EMULATOR 3 TO 6 CYL EM0352B-E36BReference: 433A -R2
AUTEL UNIVERSAL & REPROGRAMMABLE VALVE (TPMS) 433A-R2
Reference: BR0405
LPG SENSOR BRC CARD/ P1 BR0405
Reference: EU0490-M35
Brand: EUROPEGAS
TOMASETTO EU0490-M35 VAPOR TEMP PROBEReference: 18CE00010064
RELAY 6 CYL BRC SEQUENT 18CE00010064-
Reference: AEB6891-E35
AEB6891-E35 UNIVERSAL AEB EMULATOR
Reference: VSI1080-FA091/000001-E33
Brand: PRINS
LPG PRESSURE SENSOR PRINS VSI 1080-FA091/000001-E33Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Emulator is used on some Jaguar. This emulator has been designed to maintain a constant voltage of the fuel pressure sensor on Jaguar thus avoiding the ignition of the engine fault warning light. the emulator works only when the engine is on LPG It is necessary to install AEB J when the vehicle is equipped with a sensor at the end of the injection rail note below
