DEKALIN DEKASEAL 8936 ANTHRACITE DE7932-H15

Deka Seal 8936 is a high quality, permanently tacky, OEM/professional grade sealant.

The fields of application are varied and can be extended as desired.

So far, Dekaseal 8936 is used, for example, in the construction of buses, caravans, motorhomes, but also in the construction of commercial vehicles and even trains.
Sealant should always be placed between a mechanical connection.

Colour: Charcoal
Content: 310ml
Packaging: Cartridge

GRIP:

In general, Dekaseal 8936 adheres well without pre-treatment to clean, dry and dust and grease free substrates of aluminium, stainless steel, galvanized steel, zinc, copper, brass, epoxy coated metal , on most lacquered metal surfaces, on the substrate of glass, PVC, polyester (GRP), painted and lacquered wood, etc. No adhesion is obtained on polyethylene, polypropylene and Teflon without special treatment.

For substrates not mentioned and any other additional information, contact Dekalin.

Sealing of: cover strips, drains, superstructures, bores, roof constructions, passages and openings, rubber-glass connections, shutters, pipes, holes, moldings, etc.

Assembly of: windows, or the like in caravan, wagon, container construction.

And much more ...

Resistance to water, road salt, weathering.

APPLICATION

The application of the mastic can be done by hand or with a compressed air gun (2-3 bars required).

Sealing of: cover strips, drains, superstructures, bores, roof constructions, passages and openings, rubber-glass connections, shutters, pipes, holes, moldings, etc.

Assembly of: windows, or similar in the caravan, wagon, container construction...

The substrate must be clean, dry and free of grease. Excess material can be removed after installation without residue.
The filler remains slightly tacky after drying, but is odorless and paint compatible.

Dekaseal 8936 is a high performance, non-hardening, slightly tacky, permanently tacky polyisobutene (PIB) based plastic sealant that is self-removable, but not paintable.
APPLICATIONS: Sealing overlaps and joints in the construction of, for example, buses, caravans, motorhomes and trucks.
Sealing screws, major fittings, handles, bands, brackets, fasteners, panel trims and awning rails.
Sealing of sunroof systems, service doors, ventilation systems, windows and fittings. Applied under blinding strips both for the installation of windows and fine bubbles in the construction of caravans, transport vehicles and receptacles.
Suitable for use between metal plate, glass, GFK, wood and other materials.
Sealing the rubber-glass joint in buses, cars and trucks.
CHARACTERISTICS: Very low moisture vapor permeability (0.1-0.2 g/day/m²).
Excess Dekaseal 8936 can be removed after a few minutes with the same product.
Very good UV resistance and proven anti-aging properties.
The sealant must be applied between two fixed mechanical substrates.
Generally good adhesion to many types of substrates without using pre-treatment.
Dekaseal 8936 is available in different viscosities and colors.
Very long storage life, up to two years.
Long-term durability experience, many references.
Cannot be painted. If necessary, use Dekaseal 1512 or Dekaseal 1517.
TECHNICAL DATA Base material: polyisobutene, synthetic resins, fillers and solvents Consistency: pasty Method of curing/fixing: solvent diffusion Specific gravity (20°C), DIN 51757: approx. 1.4 kg/litre Open time (20°C/RH 50%)
approx. 3 hours Removal of excess material: after a few minutes with the same product Solid content (DIN 53216, 3 hours at 120°C)
: approx. 89% depending on color Viscosity (20°C, flow meter, 49 ml. 2 bar, 4 mm nozzle): approx. 40 s depending on color Temperature resistance (cured): -30°C to +100°C Application temperature: +5°C to +35°C

UV and weather resistance: excellent Colors (standard): dark gray (RAL 7016), gray (RAL 7037). light gray (RAL 7035), black Packaging: 310 ml cartridges, 560 ml pouches, other packaging on request ADHESION In general, Dekaseal 8936 adheres well without pre-treatment to clean, dry and dust and grease-free substrates. aluminium, stainless steel, galvanized steel, zinc, copper, brass, epoxy lacquered metal, on most lacquered metal surfaces, on glass substrate, PVC, polyester (GRP), painted and lacquered wood, etc. No adhesion is obtained on polyethylene, polypropylene and Teflon without special treatment. For substrates not mentioned and any other additional information, contact Dekalin. METHOD OF USE Dekaseal 8936 can be applied by hand or with an air gun. When using compressed air, a pressure of 2-3 bar is required. Product sprays into grooves, gaps, etc. and smooth. Excess material is removed with the same material after a few minutes. The material can be cleaned with white spirit. The mastic retains a certain thickness after the drying time. It is odorless and does not attack the paint. STORAGE STABILITY Dekaseal 8936 is frost resistant. The storage temperature must be between +15°C and +25°C. Bundles should be protected from direct sunlight and heat. If kept in a cool, dry place, the original unopened packets can be stored for at least two years. SAFETY PRECAUTIONS See our latest Safety Data Sheet for more information. TRANSPORT CLASSIFICATION See our latest Safety Data Sheet for more information.

All figures, recommendations and safety measures are based on thorough examinations and our actual experience and do not represent any commitment. Although the documentation has been compiled with the greatest care, we accept no responsibility for errors, inaccuracies or printing errors. We reserve the right to modify the product if we deem it necessary. Since the design, quality of the substrate and the conditions of application are beyond our control, we accept no liability for work carried out on the basis of this documentation. We therefore recommend that you carry out your own on-site tests .

TECHNICAL SHEET TO DOWNLOAD BELOW