Home
Brands

  • Banner

STEERING DAMPER

Active filters
SOCKET PIN FOR THE LOWER BALL JOINT CITROEN AND PEUGEOT 51MM

Reference: 20a-lbj51

PIN SOCKET FOR CITROEN AND PEUGEOT LOWER BALL JOINT 51MM
(0)
Its special design with 4 pins allows / installation without damaging other components. driver: 3/4” Size: 19 x 45mm dia. ext. 51mm in diameter. ext. 43.00mm cut. 4 x 4.1 mm studs Application: Citroen BX (82-94) Citroen C5; Xantia Peugeot 305 (82-90); 405 (87-96); 406; 605; 607 ...
Price €15.75
More
In stock
Out-of-Stock SOCKET PIN FOR THE LOWER BALL JOINT CITROEN AND PEUGEOT 60MM

Reference: 20a-lbj60

PIN SOCKET FOR CITROEN AND PEUGEOT LOWER BALL JOINT 60MM
(0)
Suitable for daily use in the workshop and its special design with 4 pins allows / installation without damaging other components. Drive: 38mm Height: 57mm Avg. ext. 60mm Avg. ext. 52mm Cut. Pins 5 x 5 mm application: Citroen C5, C6 Peugeot 407, 607
Price €19.75
More
Out-of-Stock
PULLER BALL JOINT OF RACK 35/45MM-

Reference: 20kb-04781

RACK BALL JOINT PULLER 35/45MM-
(0)
Commonly called Tulip. The hollow body allows the guide bar to pass until the axial joint touches the head part of the tool Choose a 27mm wrench or 1/2" socket to work the end of this tool, turn it counter-clockwise to loosen the axial joint
Price €49.92
More
In stock
On sale! PULLER BALL JOINT AXIAL WITH 3 INTERCHANGEABLE HEADS-4PCS

Reference: 20s-b4sr

AXIAL BALL JOINT PULLER WITH 3 INTERCHANGEABLE HEADS-4PCS
(0)
Used to unlock and lock the axial ball joints at the end of the steering rack. These rollers grip the axle, to be used with a 27 hex key or a 1/2″ square. Head sizes: 1st: 30 to 35 mm 2nd: 35 to 40 mm 3rd: 40 to 45 mm
Price €81.58
More
Last items in stock
TOOL GAUGE OF the SPRING TO THE STEERING knuckle

Reference: 20a-711

STEERING BALL JOINT SPRING SPREADER TOOL
(0)
Tie Rod End Spring Spreader Tool Perfect for removing the spring and shock rod from the steering knuckle. No damage to aluminum or cast iron steering hubs.
Price €49.92
More
In stock
PULLER FOR BALL JOINTS

Reference: 20ah-1257

BALL PULLER
(0)
– To remove the steering rod ball joints Mercedes-Benz W220 W211 W230 lower ball joint extractor – Also suitable for SUVs
Price €29.17
More
In stock
MAGNETIC GAUGE UNIVERSAL ALIGNMENT OF THE WHEELS

Reference: 20a-mcg

UNIVERSAL MAGNETIC WHEEL ALIGNMENT GAUGE
(0)
The meter is used to adjust the suspension springs and leaf springs, and to adjust the camber before and after replacing the shock absorber, so as to have the same inclination.
Price €49.17
More
Last items in stock
EXTRACTORS JOINT FOR FRONT AXLE, TIE RODS, BALL JOINTS, ETC

Reference: 20kb-04340

MIXED PULLERS FOR FRONT AXLE, TIE-RODS, JOINTS, ETC
(0)
BALL JOINT EXTRACTOR, STEERING LINKS, TIE RODS...and mainly for all front axles. Suitable for working on ball joints, tie rods, ball joints, steering ball joints, steering arms, tie rods, ball bearings, etc.
Price €78.38
More
In stock
On sale! Out-of-Stock TOOLS FOR TRANSMISSION BELLOWS

Reference: 20a-125

TRANSMISSION BOOT INSTALLER TOOLS
(0)
Gimbal bellows installation, this pneumatic tool, with its 8 articulated arms, makes it possible to spread the bellows and put it in place. Also suitable for all types of VL and light utility driveshafts.
Price €321.25
More
Out-of-Stock
On sale! POWERFUL HAMMER INERTIA FOR EXTRACTION HUB, BEARING, PULLEY...

Reference: 20kb-04006

INERTIA PULLER HUB, BEARING, PULLEY
(0)
Internal and external pullers provide a variety of combinations for pulling bearings, gears and seals. It consists of a key adapter, a tow hook, a rear axle puller, etc.
Price €89.60
More
In stock
A CYLINDER HAS 2 FLOORS AND PUMP AND RELEASE PEDAL 1 TON

Reference: 20t60260

2-STAGE JACK AND PUMP AND PEDAL RELEASE 1 TON
(0)
2-STAGE JACK AND PUMP AND PEDAL RELEASE Two-stage 1-ton transmission jack with pump and pedal release This two-stage transmission jack makes it easier to handle and position transmissions on passenger cars and light trucks
Price €678.36
More
In stock
JACK, HYDRO-PNEUMATIC 25 AND 50 TONS WITH ACTUATOR, 2-STAGE

Reference: 20T22050

25 AND 50 TON HYDRO-PNEUMATIC JACK WITH 2-STAGE ACTUATOR
(0)
25 and 50 ton hydro-pneumatic jack with two-stage actuator The cylinder is equipped with a two-stage actuator: And the lifting capacity is: – Position I lifting capacity 25T – Position II lifting capacity 50T
Price €1,837.94
More
In stock
JACK LIFTING HYDRO-PNEUMATIC ROLLING CAPACITY 22 TONS

Reference: 20T22050

ROLLING HYDRO-PNEUMATIC LIFTING JACK CAPACITY 22 TONNES
(0)
Hydro-pneumatic rolling jack with a capacity of 22,000 kgs This hydraulic cylinder is ideal for industrial applications. The jack has a lifting capacity of 22 tons and is a perfect helper in your workshop. It has a low underlying height to provide maximum access and easy adjustment. This item is perfectly applicable in garages, workshops and factories.
Price €458.04
More
In stock
PNEUMATIC JACK 4.5 TONS 3 BULBS

Reference: 20PM-03 R2

PNEUMATIC JACK 4.5 TONS 3 FLUIDS
(0)
This pneumatic cylinder is powered by compressed air. Pneumatic jack 4.5 tons 3 flanges Maximum pressure 8 bar Weight 23 [kg] Capacity 4.5 [t] Minimum height 125 [mm] Max. height 355 [mm] Stroke 230 [mm] Minimum pressure 7 bar
Price €572.08
More
In stock
HYDRAULIC FLOOR JACK ALUMINUM -9 KG -SPECIAL CONVENIENCE STORE

Reference: 20bgs2885

HYDRAULIC ALUMINUM JACK -9 KG - SPECIAL TOWARDS DEVICE
(0)
Hydraulic aluminum jack -9 kg - special repairman – Reduced weight by aluminum construction – min Height: 125 mm – max. Height: 340mm. – Length: 492mm – Width: 230mm – Weight: 9.2 Kg – front wheels: Ø 65 mm – Swivel castors: Ø 40 mm – with practical carrying handle
Price €396.06
More
In stock
HYDRAULIC JACK VERY SLIM - 3T DUAL-PISTON

Reference: 20t31513

VERY LOW PROFILE HYDRAULIC JACK - 3T DOUBLE PISTON
(0)
Ultra Low Profile Hydraulic Jack - 3T Dual Piston Very low car jack with a capacity of 3000 kg. The maximum reduction of the lifting point to 70mm with optimal rigidity makes it possible to work with all types of vehicles, including vehicles with low ground clearance and cars equipped with lowered suspension.
Price €344.40
More
In stock
COMPRESSOR shock ABSORBERS HYDRAULIC

Reference: presamort

HYDRAULIC SHOCK ABSORBER COMPRESSOR
(0)
1 ton hydraulic press replace or dismantle the shock absorbers of your car safely Easy to use thanks to the pedal and the hydraulic jack! Change your shock absorbers safely while saving time
Price €277.44
More
Last items in stock
PULLER WHEEL BEARING VW T5/TRANSPORTER, TOUAREG - Ø 85mm 20bgs8324

Reference: 20a-h185

Brand: AIR GPL

WHEEL BEARING PULLER VW T5/TRANSPORTER, TOUAREG- Ø 85mm 20a-h185
(0)
WHEEL BEARING PULLER VW T5 MULTIVAN AND TRANSPORTER, TOUAREG - Ø 85 MM A special kit for installing and removing bearings – wheel hub with a diameter of 85mm. The use of this kit allows the dismounting of the bearing-hub at an appropriate angle, which is very important to avoid damage to the casing and other elements. Suitable for VW T5 and Touareg with...
Price €147.22
More
Last items in stock
On sale! TOOLS RAISES A BELLOWS OF PNEUMATIC TRANSMISSION

Reference: 20a-p115

PNEUMATIC TRANSMISSION BELLOW TOOLS 20 a-p115
(0)
Gimbal bellows installation, this pneumatic tool, with its 8 articulated arms, makes it possible to spread the bellows and put it in place. Also suitable for all types of VL and light utility driveshafts.
Price €302.76
More
Last items in stock
GUN GREASE CARTRIDGE PG85

Reference: PG85

PG85 GREASE CARTRIDGE GUN
(0)
GREASE CARTRIDGE GUN Can only be used with 85 gram L145MM GREASE cartridges
Price €33.54
More
Last items in stock
HYDRAULIC FLOOR JACK ALUMINUM -9 KG -SPECIAL CONVENIENCE STORE

Reference: 20s-abj3

PNEUMATIC JACK 3 BODS - 3 TONNES
(0)
Pneumatic jack 3 cylinders - 3 tons The Pneumatic Cushion Lift, commonly referred to as the SATRA Snowman, has been designed and manufactured to lift vehicles up to 3000 kg. The jack has two control valves, inlet and outlet, which makes control very easy. SEE DESCRIPTION BELOW
Price €302.85
More
Last items in stock
On sale! TOOLS RAISES A BELLOWS OF PNEUMATIC TRANSMISSION

Reference: 20a-125

PNEUMATIC TRANSMISSION BELLOW TOOLS GM 20a-125
(0)
TOOLS for fitting universal joint bellows, this large model pneumatic tool, with its 8 articulated arms, allows the bellows to be moved aside and put in place. Also suitable for all types of VL and light utility driveshafts.
Price €325.11
More
In stock
Back to top